SkyWeather System Not Posting Information

#
#
# configuration file - contains customization for exact system
#

# it is a good idea to copy this file into a file called "conflocal.py" and edit that instead of this one. This file is wiped out if you update SkyWeather.

SWDEBUG = True

SWVERSION = "0.0"
import uuid

# printing the value of unique MAC
# address using uuid and getnode() function
MACADDRESS = hex(uuid.getnode())

mailUser = "pcoladon@gmail.com"
mailPassword = "xxxxxx"

notifyAddress ="pcoladon@me.com"

fromAddress = "pcoladon@gmail.com"

enableText = True
textnotifyAddress = "xxxxxxxxxx@vtex.com"

#MySQL Logging and Password Information

enable_MySQL_Logging = True
MySQL_Password = "xxxxxx"

# modify this IP to enable WLAN operating detection - search for WLAN_check in SkyWeather.py
enable_WLAN_Detection = True
PingableRouterAddress = "192.168.0.1"

# LED configuration (on use on a Raspberry Pi 3B+)

runLEDs = True


# WeatherSTEM configuration

USEWEATHERSTEM = False
INTERVAL_CAM_PICS__SECONDS = 600
STATIONMAC = MACADDRESS
STATIONKEY="xxxxxxxxxxxx"
STATIONHARDWARE=""


# WeatherUnderground Station

WeatherUnderground_Present = True
WeatherUnderground_StationID = "xxxxxxxxxxx"
WeatherUnderground_StationKey = "xxxxxxxxx"

############
# Blynk configuration
############

USEBLYNK = True
BLYNK_AUTH = 'xxxxxxxxxxxxxxxxxxxxx'
BLYNK_URL = 'http://blynk-cloud.com/'



# for barometeric pressure - needed to calculate sealevel equivalent - set your weatherstation elevation here

BMP280_Altitude_Meters = 40.0

# device present global variables


Camera_Present = True
TCA9545_I2CMux_Present = True
SunAirPlus_Present = False
AS3935_Present = True
DS3231_Present = False
BMP280_Present = False
BME680_Present = False
HDC1080_Present = False
SHT30_Present = False
AM2315_Present = True
ADS1015_Present = False
ADS1115_Present = False
OLED_Present = False
OLED_Originally_Present = False
WXLink_Present = True
Sunlight_Present = False
TSL2591_Present = False
DustSensor_Present = True

# set Sunlight High Gain (indoors - 1) or Low Gain (outdoors - 0)
Sunlight_Gain = 0


# if the WXLink has stopped transmitting, == False
WXLink_Data_Fresh = False
WXLink_LastMessageID = 0

# Pin definitions
pixelPin = 21

DustSensorPin = 19
DustSensorPowerPin = 26

#WeatherRack
anemometerPin = 20
rainPin = 13


SHT30GSPIN = 6
AM2315GSPIN = 6

# for fan
GPIO_Pin_PowerDrive_Sig1 = 5
GPIO_Pin_PowerDrive_Sig2 = 5 # To avoid stepping on GPIO 6

WATCHDOGTRIGGER = 4

I have a slightly different problem. Mine will post to wunderground and WeatherStem, but only when it first starts. It doesn't do it again. I can see that the data is being added to the MySQL database. The device is online, because I can connect to it. And I can verify that SkyWeather is actually running.

Any idea what I might be missing?

It looks like it thinks the data is being sent to wunderground.


I was unable to see the attempt to send to WeatherStem. Does that appear the same way?

The only errors I found in the output were


and


Pictures were successfully uploaded this morning (that's how I discovered the camera was upside down), but it hasn't worked since.

(1804.6656000000003, 913, 287)
()
('Pi Camera Revision', u'ov5647')
('after bme680', True)
as3935 start
as3935 present at 0x02
exception in SHT30 Check
Traceback (most recent call last):
File "SkyWeather.py", line 730, in <module>
outsideHumidity, outsideTemperature, crc_checkH, crc_checkT = sht30.fast_read_humidity_temperature_crc()
File "./SDL_Pi_SHT30/SHT30.py", line 240, in fast_read_humidity_temperature_crc
self._fast_read_data()
File "./SDL_Pi_SHT30/SHT30.py", line 78, in _fast_read_data
self._device.write_i2c_block_data(SHT30_I2CADDR,SHT30_READCOMMAND,[0x06])
IOError: [Errno 121] Remote I/O error

[Errno 121] Remote I/O error
after SHT30
3 4 3 188 0 255 112 8
outsideTemperature: 25.5 C
outsideHumidity: 95.6 %
crc: 0x870

SkyWeather Weather Station Version 042 - SwitchDoc Labs


Program Started at:2019-08-13 07:16:20

----------------------
I2C Mux - TCA9545: Present
BME680: Present
BMP280: Not Present
SkyCam: Present
DS3231: Not Present
HDC1080: Not Present
SHT30: Not Present
AM2315: Present
ADS1015: Not Present
ADS1115: Present
AS3935: Present
OLED: Not Present
SunAirPlus/SunControl: Present
SI1145 Sun Sensor: Not Present
TSL2591 Sun Sensor: Present
DustSensor: Present
WXLink: Not Present

UseBlynk: Not Present
UseMySQL: Present
Check WLAN: Present
WeatherUnderground: Present
UseWeatherStem: Present
----------------------
-----------------
SunAirPlus Sampling
-----------------
-----------------
Sample and Display
-----------------
-----------------
Weather Sampling
-----------------
(' value = ', 2241.375)
(' voltageValue = ', 2.241375)
-----------------
AM2315 Stats: (g,br,bc,rt,pc) (1, 0, 0, 0, 0)
--Sending Data to WeatherUnderground--
cws=| 0.0
myURL= ID=XXXXXXXXXX&PASSWORD=xxxxxxxx&dateutc=now&winddir=45&windspeedmph=0.00&windgustmph=0.00&humidity=95&tempf=78.80&dewptf=77.11&rainin=0.00&dailyrainin=0.00&baromin=29.94&indoortempf=80.47&indoorhumidity66.39=&software=SkyWeather
weatherstation.wunderground.com/weatherstation/updateweatherstation.php?ID=XXXXXXXXXX&PASSWORD=xxxxxxxx&dateutc=now&winddir=45&windspeedmph=0.00&windgustmph=0.00&humidity=95&tempf=78.80&dewptf=77.11&rainin=0.00&dailyrainin=0.00&baromin=29.94&indoortempf=80.47&indoorhumidity66.39=&software=SkyWeather
success

GET sent
-----------------
SunAirPlus Sampling
-----------------
-----------------
-----------------
-----------------
AS3935 Lightning Detector
-----------------
Last result from AS3935:
----No Lightning detected---
Lightning Count = 0
-----------------
-------------
Current State
-------------
currentOutsideTemperature = 26.0
currentOutsideHumidity = 95.3
currentInsideTemperature = 26.93
currentInsideHumidity = 66.395
currentRain60Minutes = 0.0
currentSunlightVisible = 1802.0544
currentSunlightIR = 288
currentSunlightUV = 0
currentSunlightUVIndex = 0.0
ScurrentWindSpeed = 0.0
ScurrentWindGust = 0
ScurrentWindDirection = 45
currentTotalRain = 0.0
currentBarometricPressure = 986.69
currentAltitude = 229.0
currentSeaLevel = 1013.91317556
barometricTrend = True
pastBarometricReading = 986.69
Outdoor_AirQuality_Sensor_Value = 0
Hour24_Outdoor_AirQuality_Sensor_Value = 0
Indoor_AirQuality_Sensor_Value = 0
-------------
currentAs3935Interrupt = 0
currentAs3935LastInterrupt = 0
currentAs3935LastDistance = 0
currentAs3935LastStatus = 0
currentAs3935LastLightningTimeStamp = 0
-------------
runRainbow = False
flashStrip = False
runOLED = True
-------------
Last_Event = My Last Event
EnglishMetric = 0
-------------
batteryVoltage 3.92668
batteryCurrent 466.8
solarVoltage 4.74028
solarCurrent 37.2
loadVoltage 5.128
loadCurrent 348.4
batteryPower 1.832974224
solarPower 0.176338416
loadPower 1.7865952
batteryCharge 79.763792217
-------------
-------------
WXbatteryVoltage 0
WXbatteryCurrent 0
WXsolarVoltage 0
WXsolarCurrent 0
WXloadVoltage 5.0
WXloadCurrent 0
WXbatteryPower 0
WXsolarPower 0
WXloadPower 0
WXbatteryCharge 0
-------------
fanState = False
-------------
WXLink Blocks
Block1 Length= 0
Block2 Length= 0
-----------------
Sample and Display Done
-----------------
taking SkyPicture
--------------------
SkyCam Picture Taken
--------------------
Traceback (most recent call last):
File "/home/pi/SDL_Pi_SkyWeather/SkyCamera.py", line 56, in takeSkyPicture
font = ImageFont.truetype("/usr/share/fonts/truetype/freefont/FreeSans.ttf", 25)
File "/usr/lib/python2.7/dist-packages/PIL/ImageFont.py", line 280, in truetype
return FreeTypeFont(font, size, index, encoding, layout_engine)
File "/usr/lib/python2.7/dist-packages/PIL/ImageFont.py", line 145, in __init__
layout_engine=layout_engine)
IOError: cannot open resource
--------------------
SkyCam Picture Failed
--------------------
--------------------
SkyCam Package Sending
--------------------
The pastebin URL is (r.text):{"internal":{"readings":[{"value":"26.000","id":"30124863","sensor":"1"},{"value":"95.300","sensor":"4","id":"30124866"},{"value":"26.930","id":"30124869","sensor":"7"},{"value":"66.395","sensor":"10","id":"30124872"},{"sensor":"13","id":"30124875","value":null},{"value":"1802.054","sensor":"16","id":"30124878"},{"id":"30124881","sensor":"19","value":"288.000"},{"sensor":"22","id":"30124884","value":null},{"id":"30124887","sensor":"25","value":null},{"id":"30124890","sensor":"28","value":null},{"sensor":"31","id":"30124893","value":"45.000"},{"value":null,"id":"30124896","sensor":"34"},{"sensor":"37","id":"30124899","value":"986.690"},{"sensor":"40","id":"30124902","value":"229.000"},{"sensor":"43","id":"30124905","value":"1013.913"},{"id":"30124908","sensor":"46","value":"0.000"},{"sensor":"49","id":"30124911","value":null},{"value":null,"sensor":"52","id":"30124914"},{"sensor":"55","id":"30124917","value":null},{"value":null,"id":"30124920","sensor":"58"}],"record":"1151202","image":"1151577"},"jpg":"https://cdn.weatherstem.com/user_generated/skyweather/ktnashla21/2019/08/13/12/16/28.jpg","json":"https://cdn.weatherstem.com/user_generated/skyweather/ktnashla21/2019/08/13/12/16/28.json"}
-----------------
Scheduled Jobs
-----------------
Jobstore default:
patTheDog (trigger: interval[0:00:10], next run at: 2019-08-13 07:16:43 CDT)
checkForButtons (trigger: interval[0:00:10], next run at: 2019-08-13 07:16:43 CDT)
sampleAndDisplay (trigger: interval[0:00:30], next run at: 2019-08-13 07:17:03 CDT)
tick (trigger: interval[0:01:00], next run at: 2019-08-13 07:17:33 CDT)
writeWeatherRecord (trigger: interval[0:05:00], next run at: 2019-08-13 07:21:33 CDT)
writePowerRecord (trigger: interval[0:05:00], next run at: 2019-08-13 07:21:33 CDT)
updateRain (trigger: interval[0:05:00], next run at: 2019-08-13 07:21:33 CDT)
checkForShutdown (trigger: interval[0:05:00], next run at: 2019-08-13 07:21:33 CDT)
takeSkyPicture (trigger: interval[0:05:00], next run at: 2019-08-13 07:21:33 CDT)
statusAM2315 (trigger: interval[0:15:00], next run at: 2019-08-13 07:31:33 CDT)
doAllGraphs (trigger: interval[0:15:00], next run at: 2019-08-13 07:31:33 CDT)
barometricTrend (trigger: interval[0:15:00], next run at: 2019-08-13 07:31:33 CDT)
read_AQI (trigger: interval[0:15:00], next run at: 2019-08-13 07:31:33 CDT)
WLAN_check (trigger: interval[0:30:00], next run at: 2019-08-13 07:46:33 CDT)
statusRain (trigger: interval[1:00:00], next run at: 2019-08-13 08:16:33 CDT)
rebootPi (trigger: cron[day='5-30/5', hour='0', minute='4'], next run at: 2019-08-15 00:04:00 CDT)
-----------------
------Patting The Dog-------

I am running Buster. Looks like I was missing a package. Once I installed fonts-freefont-ttf everything started working like it should. Thanks for your help.