Post by Powderjockey on Aug 11, 2019 9:45:41 GMT -8
I was checking to see how things were running this morning and I found the following error in the terminal
------Patting The Dog-------
(' value = ', 11.625)
(' voltageValue = ', 0.011625)
-----------------
I/O error(121): Remote I/O error
------Patting The Dog-------
------Patting The Dog-------
Tick! The time is: 2019-08-11 11:20:04.135570
There was nothing being reported on Wunderground. Said it had been updated 38 minutes ago.So I stopped the program, Ctrl+C, and then restarted the program and then received this error:
sudo python SkyWeather.py
('Pi Camera Revision', u'ov5647')
Traceback (most recent call last):
File "SkyWeather.py", line 376, in <module>
tca9545.write_control_register(TCA9545_CONFIG_BUS0)
File "./SDL_Pi_TCA9545/SDL_Pi_TCA9545.py", line 74, in write_control_register
self._write(TCA9545_REG_CONFIG, config)
File "./SDL_Pi_TCA9545/SDL_Pi_TCA9545.py", line 52, in _write
self._bus.write_byte_data(self._addr, register, data)
IOError: [Errno 121] Remote I/O error
Checked to see if pigpiod was running and it was. Ran the program once again and then received this error:sudo python SkyWeather.py
>>>>>>>>>>>>>>>>>>><<<<<<<<<<<
TCA9545 I2C Mux Not Present
>>>>>>>>>>>>>>>>>>><<<<<<<<<<<
('Pi Camera Revision', u'ov5647')
Error accessing 0x48: Check your I2C address
Error accessing 0x48: Check your I2C address
Type Error
I/O error(121): Remote I/O error
('after bme680', False)
as3935 start
I/O error(121): Remote I/O error
I/O error(121): Remote I/O error
exception in SHT30 Check
Traceback (most recent call last):
File "SkyWeather.py", line 730, in <module>
outsideHumidity, outsideTemperature, crc_checkH, crc_checkT = sht30.fast_read_humidity_temperature_crc()
File "./SDL_Pi_SHT30/SHT30.py", line 240, in fast_read_humidity_temperature_crc
self._fast_read_data()
File "./SDL_Pi_SHT30/SHT30.py", line 78, in _fast_read_data
self._device.write_i2c_block_data(SHT30_I2CADDR,SHT30_READCOMMAND,[0x06])
IOError: [Errno 121] Remote I/O error
[Errno 121] Remote I/O error
after SHT30
SkyWeather Weather Station Version 042 - SwitchDoc Labs
Program Started at:2019-08-11 11:22:00
----------------------
I2C Mux - TCA9545: Not Present
BME680: Not Present
BMP280: Not Present
SkyCam: Present
DS3231: Not Present
HDC1080: Not Present
SHT30: Not Present
AM2315: Not Present
ADS1015: Not Present
ADS1115: Not Present
AS3935: Not Present
OLED: Not Present
SunAirPlus/SunControl: Not Present
SI1145 Sun Sensor: Not Present
TSL2591 Sun Sensor: Not Present
DustSensor: Present
WXLink: Not Present
UseBlynk: Present
UseMySQL: Present
Check WLAN: Present
WeatherUnderground: Present
UseWeatherStem: Present
----------------------
-----------------
Sample and Display
-----------------
-----------------
Weather Sampling
-----------------
-----------------
Traceback (most recent call last):
File "SkyWeather.py", line 1721, in <module>
sampleAndDisplay()
File "SkyWeather.py", line 1260, in sampleAndDisplay
sampleWeather()
File "SkyWeather.py", line 1007, in sampleWeather
HTUhumidity = bmp180Humidity
UnboundLocalError: local variable 'bmp180Humidity' referenced before assignment
Nothing was changed from yesterday. I rebooted the system and receive the same error.
Is there a mechanism to report to the owner when the SkyWeather is not functioning?