|
Post by SDL on Oct 9, 2019 16:52:18 GMT -8
Folks, THIS PROGRAM HAS NOW ENDED! But thanks for your support. We replaced over 100 of the AM2315 units. Bad AM2315 unit!
We have found a problem with our latest batch of AM2315 Temperature / Humidity Sensors that we have been shipping with OurWeather and with SkyWeather kits.
Basically, we have found that about 10% or so of the AM2315 sensors are not ESP8266 compatible (that is the processor used in the current OurWeather kit). That is way too high of a failure rate for this kit! They work perfectly with Arduino and quite well with the Raspberry Pi (still a few failures), FYI.
We are moving to the SHT30 based temperature and humidity sensor. That fixes the problem.
We don't care when or where you bought your kit, we will replace them anyway.
To participate:
Ship your AM2315 with your shipping address enclosed in your parcel:
SwitchDoc Labs OurWeather AM2315 Exchange 909 S Shelley Lake Lane Spokane Valley, WA 99037
We are glad we figured this out!
Best regards, Laurie Vessey
|
|
|
Post by enekuda on Nov 13, 2019 20:52:59 GMT -8
I replaced my AM2315 with the SHT30 you sent and its still reading 32F and 0% Humidity, as was the old one that i was directed here to get replaced. Is there an update or other setting that needs to get changed to switch to this new sensor?
|
|
|
Post by SDL on Nov 15, 2019 10:00:10 GMT -8
Enekuda,
Give me the details of your system. OurWeather I assume? What version of software are you running. Definitely update to the latest Version. See in the manual how to do the OTA update.
BP
|
|
|
Post by sid7hartha on Dec 1, 2020 18:43:04 GMT -8
I replaced my AM2315 with the SHT30 you sent and its still reading 32F and 0% Humidity, as was the old one that i was directed here to get replaced. Is there an update or other setting that needs to get changed to switch to this new sensor? I'm having this problem now with the am2315. Did you figure out your problem? Is switching to the sht30 just a hardware swap, or is a software upgrade required as well?
|
|
|
Post by SDL on Dec 2, 2020 8:38:16 GMT -8
Hardware swap. What software are you running?
BP
|
|
|
Post by sid7hartha on Dec 25, 2020 14:57:24 GMT -8
I doubled checked and I upgraded to v36 on Nov 30. Thanks for the quick response! (My bad for not checking in sooner.)
|
|