phate
New Member
Posts: 43
|
Post by phate on Jan 15, 2020 0:46:25 GMT -8
Ok so I now have the updated watchdog. With the grove plug. I connected and soldered everything up as per this guide. www.switchdoc.com/2019/07/skyweather-adding-watchdog/When I connect the grove cable to the groverpi then the channel 1 on the watchdog flashes every 2 seconds. Disconnected. It seems to flash as per the pot setting. None of these. Ever results in a reboot. Does any of this sound familiar to anyone? Cheers
|
|
|
Post by SDL on Jan 15, 2020 9:45:41 GMT -8
Hmmm. So tell me (or show me better yet) the wires going from the WatchDog to SkyWeather. Let me check this out.
BP
|
|