|
Post by SDL on Jun 1, 2023 11:27:35 GMT -8
Well, there is a keep alive message that the Thunderboard sends every 15 minutes by my memory. Sounds like the box is not transmitting. I need to see a much longer output from the serial monitor on the TB box.
Take a picture of the MiniProPlus so I can see the transmission board.
BP
|
|
|
Post by Powderjockey on Jun 6, 2023 14:59:41 GMT -8
Well, there is a keep alive message that the Thunderboard sends every 15 minutes by my memory. Sounds like the box is not transmitting. I need to see a much longer output from the serial monitor on the TB box. Take a picture of the MiniProPlus so I can see the transmission board. BP tb-output.txt (17.52 KB)
|
|
|
Post by SDL on Jun 10, 2023 17:33:22 GMT -8
You have no transmitter board plugged into the Mini Pro Plus.
I don't know if the grove transmitter and receiver will work that you have plugged in. Never tested that.
BP
|
|
|
Post by Powderjockey on Jun 11, 2023 13:05:53 GMT -8
You have no transmitter board plugged into the Mini Pro Plus. I don't know if the grove transmitter and receiver will work that you have plugged in. Never tested that. BP That's what was shipped with the kit.
|
|
|
Post by SDL on Jun 13, 2023 5:45:50 GMT -8
PM me your shipping address and we will send a different transmitter. Those clearly don't work.
BP
|
|
|
Post by Powderjockey on Jul 8, 2023 14:50:40 GMT -8
PM me your shipping address and we will send a different transmitter. Those clearly don't work. BP I sent my address, did you send the item? Thanks Scott
|
|
|
Post by SDL on Jul 8, 2023 15:15:56 GMT -8
Thanks for reminding me! I will do it this week. Sorry about that!
John
|
|
|
Post by Powderjockey on Jul 20, 2023 18:30:58 GMT -8
Thanks for reminding me! I will do it this week. Sorry about that! John Bump?
|
|
|
Post by Powderjockey on Aug 5, 2023 14:08:08 GMT -8
I brought the unit inside to start to get the 30 feet of cable spliced into the wiring to the WR3 head and install the 433 mhz sender for the Thunder/Lightning MiniPro board. While I waited for the 433 mhz sender I set everything up on my work bench and I could not get any information to come out of the WR3 head. Zeros. Nothing but zeros.
I haven't spiced the cable yet and won't until I can get some data.
What can be wriong with this?
PS: What is a good glue to use to keep the boards pinned to the case? I've tried Hot Glue, PL600 and silicone. Both boards with this stuff have come loose and fallen off.
|
|
|
Post by SDL on Aug 7, 2023 10:42:44 GMT -8
We use super glue and plastic posts.
No data from your work bench? I thought you could get data from your work bench.
John
|
|
|
Post by Powderjockey on Aug 7, 2023 10:58:15 GMT -8
No data from your work bench? I thought you could get data from your work bench. John From WeatherSenseMonitor.py ReadingCount=: 1709 Connected with result code 5 processing WeatherRack3 Weather Data This is the raw data: {"time" : "2023-08-07 12:54:31", "model" : "SwitchDoc Labs WeatherRack3", "len" : 37, "messageid" : 199712, "deviceid" : 4650, "protocolversion" : 1, "softwareversion" : 0, "weathersenseprotocol" : 20, "windspeed" : 0, "windforce" : 0, "winddirectiondegrees" : 0, "humidity" : 0, "temperature" : 0, "noise" : 0, "PM2_5" : 0, "PM10" : 0, "pressure" : 0, "hwlux" : 0, "lwlux" : 0, "lightvalue20W" : 0, "rain" : 0, "mic" : "CRC"}
|
|
|
Post by SDL on Aug 10, 2023 10:09:38 GMT -8
That's all zero data. You aren't getting any data. This does mean the 433MHz link is working. You have a problem between the Mini Pro Plus and your WeatherRack3.
John
|
|
|
Post by Powderjockey on Aug 13, 2023 14:50:25 GMT -8
That's all zero data. You aren't getting any data. This does mean the 433MHz link is working. You have a problem between the Mini Pro Plus and your WeatherRack3. John John, Spent a good portion of the weekend playing with this unit and I'm getting nothing but zeros. I noticed today the red led on the WR3 head is not illuminating. I'm not sure how long this has been the case, as I was getting zeros when the set up was outside connected to the solar panel as well. I rewired the system to the extrension cable and have accounted for all of the wires and they are where they are suppose to be. In the boards securely. I'm at a loss of what to do now.
|
|