BugWeek July 2017

SDL
Global Moderator

Posts: 5,655
Raspberry Pi: Yes
Other Device: PC, arduino, beagleBone

BugWeek July 2017 Jul 17, 2017 6:05:33 GMT -8

Post by SDL on Jul 17, 2017 6:05:33 GMT -8

(See Update below)

Folks,

As planned, we are planning to fix some outstanding bugs in our software during the week of July 17th.

Here is our list:

1) GroveWeatherPi Version 2.93 Rainfall Rate reporting 0 for last 60 minutes, includes the midnight reset issue Fixed: GroveWeatherPi 2.95

2) SmartPlantPi - UV always reporting zero (Sunlight Sensor) Fixed: SmartPlantPi Version 014

3) Wind Speed reports impossible speeds when wind gets > 20MPH?

Fixed: GroveWeatherPi 2.93, OurWeather Version 022

4) OurWeather V021 is reporting Gust less than current Wind Speed Fixed (we think - Hard to prove): Version 022

5) AM2315 is reportedly not reliable on the Raspberry Pi (starting Raspberry Pi Reliability Test)

6) GroveWeatherPi Wind Gust Problem Fixed (we think - Hard to prove): Version 2.94

7) Add updated JSON to SmartPlantPi Fixed: SmartPlantPi Version 014

8) SmartPlantPi Moisture Detection Locking Fixed: SmartPlantPi Version 015

Let us know if we have missed something you have reported.

Best regards,

John Shovic

P.S. For #3 and #4, we are building a "wind tunnel" that will blow air faster than 20MPH. We have a wind gauge to calibrate. How fun! Bring on the duct tape.

Last Edit: Jul 22, 2017 11:29:18 GMT -8 by SDL

karambit
New Member

Posts: 22

BugWeek July 2017 Jul 17, 2017 13:23:18 GMT -8

Post by karambit on Jul 17, 2017 13:23:18 GMT -8

Will you also address the Total rain amount not resetting at midnight and the AM2315 sometimes returning bad data or showing up not present for GroveWeatherPi? I know there are workarounds on the forums but just curious if these will be rolled into the main code. Those along with the proper rainfall rate and wind/gust speeds and I think things will be pretty solid as far as the bugs that I've ran into using the GroveWeatherPi code.

EDIT: I also forgot that at least for me, the Rain Bucket increments by 0.02" per interrupt instead of 0.01" so I have had to divide the total by 2 to get accurate amounts when uploading to Weather Underground.

Last Edit: Jul 17, 2017 13:28:06 GMT -8 by karambit

SDL Global Moderator Posts: 5,655 Raspberry Pi: Yes Other Device: PC, arduino, beagleBone	BugWeek July 2017 Jul 17, 2017 14:27:30 GMT -8 Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by SDL on Jul 17, 2017 14:27:30 GMT -8 Updated above. BP

texag New Member Posts: 21	BugWeek July 2017 Jul 17, 2017 15:33:32 GMT -8 Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by texag on Jul 17, 2017 15:33:32 GMT -8 GroveWeatherPi suffers from the Wind Gust problem as well. I've attached a screenshot of some of my wind gust data. Kevin

SDL
Global Moderator

Posts: 5,655
Raspberry Pi: Yes
Other Device: PC, arduino, beagleBone

BugWeek July 2017 Jul 18, 2017 5:55:09 GMT -8

Post by SDL on Jul 18, 2017 5:55:09 GMT -8

Here is our current status (We will just update this posting) as of July 20, 2017 :08:00):

1) GroveWeatherPi Version 2.93 Rainfall Rate reporting 0 for last 60 minutes, includes the midnight reset issue Fixed: GroveWeatherPi 2.95

2) SmartPlantPi - UV always reporting zero (Sunlight Sensor) Fixed: SmartPlantPi Version 014

3) Wind Speed reports impossible speeds when wind gets > 20MPH?

Fixed: GroveWeatherPi 2.93, OurWeather Version 022

4) OurWeather V021 is reporting Gust less than current Wind Speed Fixed (we think - Hard to prove): Version 022

5) AM2315 is reportedly not reliable on the Raspberry Pi (starting Raspberry Pi Reliability Test)

6) GroveWeatherPi Wind Gust Problem Fixed (we think - Hard to prove): Version 2.94

7) Add updated JSON to SmartPlantPi Fixed: SmartPlantPi Version 014

8) SmartPlantPi Moisture Detection Locking Fixed: SmartPlantPi Version 015

BP

Last Edit: Jul 22, 2017 9:57:36 GMT -8 by SDL

hankcowdog
New Member

Posts: 7

BugWeek July 2017 Jul 18, 2017 7:54:36 GMT -8

Post by hankcowdog on Jul 18, 2017 7:54:36 GMT -8

Jul 18, 2017 5:55:09 GMT -8 SDL said:

6) GroveWeatherPi Wind Gust Problem Fixed (we think - Hard to prove): Version 2.94

BP

Rather than using a wind tunnel, you can attach the sensors to a pole attached to the back of a pickup truck and (on a calm day) drive in a straight line. Use the car spedometer as a reference. Not perfect, but easy....

karambit New Member Posts: 22	BugWeek July 2017 Jul 18, 2017 11:53:00 GMT -8 Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by karambit on Jul 18, 2017 11:53:00 GMT -8 Does the updated bounce times also address the rain bucket showing double the amount of rain it should?

SDL Global Moderator Posts: 5,655 Raspberry Pi: Yes Other Device: PC, arduino, beagleBone	BugWeek July 2017 Jul 20, 2017 4:19:44 GMT -8 Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by SDL on Jul 20, 2017 4:19:44 GMT -8 karma bit, Are you talking about OurWeather or GroveWeatherPi? BP

karambit New Member Posts: 22	BugWeek July 2017 Jul 20, 2017 8:43:56 GMT -8 Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by karambit on Jul 20, 2017 8:43:56 GMT -8 GroveWeatherPi

SDL Global Moderator Posts: 5,655 Raspberry Pi: Yes Other Device: PC, arduino, beagleBone	BugWeek July 2017 Jul 20, 2017 16:59:41 GMT -8 Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by SDL on Jul 20, 2017 16:59:41 GMT -8 Karma Bit, Yes, the Bounce fix also fixed the double rain issue. BP

SDL Global Moderator Posts: 5,655 Raspberry Pi: Yes Other Device: PC, arduino, beagleBone	BugWeek July 2017 Jul 22, 2017 9:58:41 GMT -8 sipshowpeers likes this Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by SDL on Jul 22, 2017 9:58:41 GMT -8 OK. BugWeek July 2017 is complete. We knocked them all down except for the AM2315 and we are starting those tests (they need to run for a while). Thanks for all your help and comments! BP

SDL Global Moderator Posts: 5,655 Raspberry Pi: Yes Other Device: PC, arduino, beagleBone	BugWeek July 2017 Jul 24, 2017 10:54:57 GMT -8 Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by SDL on Jul 24, 2017 10:54:57 GMT -8 I moved it Karambit!

karambit New Member Posts: 22	BugWeek July 2017 Jul 25, 2017 4:15:55 GMT -8 Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by karambit on Jul 25, 2017 4:15:55 GMT -8 It appears the rainfall amount is still not resetting at midnight unless I missed adding in the change that fixed this. Can you point out exactly which change in the code supposedly fixed this so I can verify?

SDL Global Moderator Posts: 5,655 Raspberry Pi: Yes Other Device: PC, arduino, beagleBone	BugWeek July 2017 Jul 26, 2017 16:59:47 GMT -8 Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by SDL on Jul 26, 2017 16:59:47 GMT -8 Karmabit, It looks like this is my fault. I missed it when I was working the code. It's on the new list (next week). BP

karambit New Member Posts: 22	BugWeek July 2017 Jan 25, 2018 13:40:51 GMT -8 Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by karambit on Jan 25, 2018 13:40:51 GMT -8 The Rain Amount is still not resetting at Midnight. I have upgraded to the latest 2.99 version on github.

Post by SDL on Jul 17, 2017 6:05:33 GMT -8

Post by karambit on Jul 17, 2017 13:23:18 GMT -8

Post by SDL on Jul 17, 2017 14:27:30 GMT -8

Post by texag on Jul 17, 2017 15:33:32 GMT -8

Post by SDL on Jul 18, 2017 5:55:09 GMT -8

Post by hankcowdog on Jul 18, 2017 7:54:36 GMT -8

Post by karambit on Jul 18, 2017 11:53:00 GMT -8

Post by SDL on Jul 20, 2017 4:19:44 GMT -8

Post by karambit on Jul 20, 2017 8:43:56 GMT -8

Post by SDL on Jul 20, 2017 16:59:41 GMT -8

Post by SDL on Jul 22, 2017 9:58:41 GMT -8

Post by SDL on Jul 24, 2017 10:54:57 GMT -8

Post by karambit on Jul 25, 2017 4:15:55 GMT -8

Post by SDL on Jul 26, 2017 16:59:47 GMT -8

Post by karambit on Jan 25, 2018 13:40:51 GMT -8