OLED not working for P12Grover Weather Station?

buckwestern
Guest

OLED not working for P12Grover Weather Station? Aug 5, 2017 14:32:30 GMT -8

Quote

Post by buckwestern on Aug 5, 2017 14:32:30 GMT -8

I am trying set up the weather station and this is what I get from the test run:

# python GroveWeatherPi.py
WXLink Reset
------> See Readme to install tentacle_pi

GroveWeatherPi Solar Powered Weather Station Version 2.95 - SwitchDoc Labs

Program Started at:2017-08-05 17:15:29

----------------------
I2C Mux - TCA9545: Present
BMP280: Present
DS3231: Present
HDC1080: Not Present
HTU21DF: Not Present
AM2315: Not Present
ADS1015: Not Present
ADS1115: Present
AS3935: Present
OLED: Not Present
SunAirPlus: Present
Sunlight Sensor: Not Present
WXLink: Not Present

UseMySQL: Present
Check WLAN: Present
WeatherUnderground: Not Present

Then if I try to install the OLED manually and run the test scripts, I get this:

/Adafruit_Python_SSD1306/examples# python image.py
Traceback (most recent call last):
File "image.py", line 44, in <module>
disp = Adafruit_SSD1306.SSD1306_128_32(rst=RST)
File "build/bdist.linux-armv7l/egg/Adafruit_SSD1306/SSD1306.py", line 288, in __init__
File "build/bdist.linux-armv7l/egg/Adafruit_SSD1306/SSD1306.py", line 85, in __init__
File "build/bdist.linux-armv7l/egg/Adafruit_GPIO/GPIO.py", line 321, in get_platform_gpio
ImportError: No module named Adafruit_BBIO.GPIO

Please advise.

SDL
Global Moderator

Posts: 5,655
Raspberry Pi: Yes
Other Device: PC, arduino, beagleBone

OLED not working for P12Grover Weather Station? Aug 6, 2017 12:46:08 GMT -8

Quote

Post by SDL on Aug 6, 2017 12:46:08 GMT -8

Hi buck western (great name by the way),

Check your installation instructions very carefully. Something isn not installed.

To eliminate another possibility, please run and post the test python script under the TCA9545 directory.

Also, check your TCA8545 (I2C Mux) to make sure you have installed the I2C bus power jumpers. Post a picture too!

BP

buckwestern
New Member

Posts: 35

OLED not working for P12Grover Weather Station? Aug 6, 2017 16:58:41 GMT -8

Quote

Post by buckwestern on Aug 6, 2017 16:58:41 GMT -8

did I not plug in the power jumpers correctly?

# python testSDL_Pi_TCA9545.py

Test SDL_Pi_TCA9545 Version 1.0 - SwitchDoc Labs

Sample uses 0x73
Program Started at:2017-08-06 19:43:58

-----------BUS 0-------------------
tca9545 control register B3-B0 = 0x1
ignore Interrupts if INT3' - INT0' not connected
tca9545 control register Interrupts = 0x0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- 3c -- -- --
40: -- -- -- -- -- -- -- -- 48 -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- 57 -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- 68 -- -- -- -- -- -- --
70: -- -- -- 73 -- -- -- 77

-----------------------------------

-----------BUS 1-------------------
tca9545 control register B3-B0 = 0x2
ignore Interrupts if INT3' - INT0' not connected
tca9545 control register Interrupts = 0x0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 03 -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- 73 -- -- -- --

-----------------------------------

-----------BUS 2-------------------
tca9545 control register B3-B0 = 0x4
ignore Interrupts if INT3' - INT0' not connected
tca9545 control register Interrupts = 0x0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: 40 -- -- -- -- -- -- -- 48 -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- 73 -- -- -- --

-----------------------------------

-----------BUS 3-------------------
tca9545 control register B3-B0 = 0x8
ignore Interrupts if INT3' - INT0' not connected
tca9545 control register Interrupts = 0x0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- 73 -- -- -- --

-----------------------------------

SDL Global Moderator Posts: 5,655 Raspberry Pi: Yes Other Device: PC, arduino, beagleBone	OLED not working for P12Grover Weather Station? Aug 6, 2017 19:36:18 GMT -8 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by SDL on Aug 6, 2017 19:36:18 GMT -8 They look right to me. And your readout of the I2C busses look right too. It must be an installation problem. BP

buckwestern New Member Posts: 35	OLED not working for P12Grover Weather Station? Aug 7, 2017 4:00:53 GMT -8 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by buckwestern on Aug 7, 2017 4:00:53 GMT -8 Aug 6, 2017 19:36:18 GMT -8 SDL said: They look right to me. And your readout of the I2C busses look right too. It must be an installation problem. BP so how do I resolve this?

SDL Global Moderator Posts: 5,655 Raspberry Pi: Yes Other Device: PC, arduino, beagleBone	OLED not working for P12Grover Weather Station? Aug 7, 2017 7:39:32 GMT -8 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by SDL on Aug 7, 2017 7:39:32 GMT -8 Re do all the installation steps in the README.md and hopefully it will clear up. You can also update and upgrade your Raspian OS, but I don't think that is the issue. BP

buckwestern
New Member

Posts: 35

OLED not working for P12Grover Weather Station? Aug 8, 2017 17:54:14 GMT -8

Quote

Post by buckwestern on Aug 8, 2017 17:54:14 GMT -8

Aug 7, 2017 7:39:32 GMT -8 SDL said:

Re do all the installation steps in the README.md and hopefully it will clear up.

You can also update and upgrade your Raspian OS, but I don't think that is the issue.

BP

results of reinstallation (no new files were added):

$ sudo python SDL_image.py
Traceback (most recent call last):
File "SDL_image.py", line 58, in <module>
disp.begin()
File "build/bdist.linux-armv7l/egg/Adafruit_SSD1306/SSD1306.py", line 148, in begin
File "build/bdist.linux-armv7l/egg/Adafruit_SSD1306/SSD1306.py", line 247, in _initialize
File "build/bdist.linux-armv7l/egg/Adafruit_SSD1306/SSD1306.py", line 129, in command
File "build/bdist.linux-armv7l/egg/Adafruit_GPIO/I2C.py", line 109, in write8
IOError: [Errno 5] Input/output error

SDL Global Moderator Posts: 5,655 Raspberry Pi: Yes Other Device: PC, arduino, beagleBone	OLED not working for P12Grover Weather Station? Aug 9, 2017 16:21:09 GMT -8 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by SDL on Aug 9, 2017 16:21:09 GMT -8 That test isn't going to work unless you turn the I2C Mux on to bus 0. Look at your I2C mux output above. You can plug the OLED display directly into the Pi2Grover if you want to run that. Best, BP

buckwestern
New Member

Posts: 35

OLED not working for P12Grover Weather Station? Aug 9, 2017 16:51:47 GMT -8

Quote

Post by buckwestern on Aug 9, 2017 16:51:47 GMT -8

Aug 8, 2017 17:54:14 GMT -8 buckwestern said:

Aug 7, 2017 7:39:32 GMT -8 SDL said:

Re do all the installation steps in the README.md and hopefully it will clear up.

You can also update and upgrade your Raspian OS, but I don't think that is the issue.

BP

I did everything from the top again and it seems to be working now. Thank you.

SDL Global Moderator Posts: 5,655 Raspberry Pi: Yes Other Device: PC, arduino, beagleBone	OLED not working for P12Grover Weather Station? Aug 10, 2017 8:41:23 GMT -8 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by SDL on Aug 10, 2017 8:41:23 GMT -8 Woohoo! Post pictures of your project! We love those. We exist but to serve. BP

yulaguilos
New Member

Posts: 15

OLED not working for P12Grover Weather Station? Sept 27, 2018 11:41:32 GMT -8

Quote

Post by yulaguilos on Sept 27, 2018 11:41:32 GMT -8

Hi - i got this OLED together with the weatherpi, It is not detected and it seems not turning on. Should i see a display or some light on it even if it is not detected?

thanks
Yul

Attachments:

SDL Global Moderator Posts: 5,655 Raspberry Pi: Yes Other Device: PC, arduino, beagleBone	OLED not working for P12Grover Weather Station? Sept 27, 2018 17:55:48 GMT -8 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by SDL on Sept 27, 2018 17:55:48 GMT -8 Post the i2cdetect -y 1 results. BP

Post by buckwestern on Aug 5, 2017 14:32:30 GMT -8

Post by SDL on Aug 6, 2017 12:46:08 GMT -8

Post by buckwestern on Aug 6, 2017 16:58:41 GMT -8

Post by SDL on Aug 6, 2017 19:36:18 GMT -8

Post by buckwestern on Aug 7, 2017 4:00:53 GMT -8

Post by SDL on Aug 7, 2017 7:39:32 GMT -8

Post by buckwestern on Aug 8, 2017 17:54:14 GMT -8

Post by SDL on Aug 9, 2017 16:21:09 GMT -8

Post by buckwestern on Aug 9, 2017 16:51:47 GMT -8

Post by SDL on Aug 10, 2017 8:41:23 GMT -8

Post by yulaguilos on Sept 27, 2018 11:41:32 GMT -8

Post by SDL on Sept 27, 2018 17:55:48 GMT -8

Quick Reply