|
Post by smbhelios on Aug 12, 2017 10:31:54 GMT -8
I decided to update the software from 019 to 023, but nothing comes up after power-cycling the board. Also, I noticed that the GPIO0 LED is dimly lit. I do not remember that happening before the attempted update. How do I recover from this?
Thanks!
|
|
|
Post by SDL on Aug 13, 2017 9:41:17 GMT -8
Hmm. Sounds like the power or network was interrupted in a critical moment. The auto update is NOT foolproof, just pretty good. I think the LED is dimly lit because it is in programming mode. Did you hit the reset button? Go into the advanced manual, download the 023 code from GitHub/switchoclabs github.com/switchdoclabs/OurWeatherWeatherPlusand compile it in the arduino IDE following the instructions in the manual. If you can't do that, send it back to us and we will reprogram it for you and send it back. SwitchDoc Labs RMA #081317-01 20089 E Glenbrook Ave Liberty Lake, WA 99016 Best, BP
|
|
|
Post by smbhelios on Aug 14, 2017 14:56:26 GMT -8
Great! I'll give it a shot and let you know. I appreciate your help.
|
|