|
Post by buckwestern on Oct 28, 2018 6:42:17 GMT -8
any thoughts on this?
|
|
|
Post by buckwestern on Oct 25, 2018 17:58:54 GMT -8
Look for the current going into the battery. You don't have a battery plugged in. The current will be negative if you are charging. Without a battery plugged in, the numbers don't mean much. BP ...but I do have a battery plugged in and it runs on that battery if I remove the AC power.
|
|
|
Post by buckwestern on Oct 23, 2018 15:49:54 GMT -8
I plugged the board in and it seems to work, but I have another question, so please let me know where to redirect this. I am plugged into the wall and have a battery attached. How can I tell if the battery is charging? How can I tell if it is running correctly on AC power?
SunAirPlus Currents / Voltage ----------------- LIPO_Battery Bus Voltage: 0.00 V LIPO_Battery Shunt Voltage: 11.68 mV LIPO_Battery Load Voltage: 0.01 V LIPO_Battery Current 1: 116.80 mA Battery Power 1: 0.00 W
Solar Cell Bus Voltage 2: 0.67 V Solar Cell Shunt Voltage 2: 0.00 mV Solar Cell Load Voltage 2: 0.67 V Solar Cell Current 2: -0.00 mA Solar Cell Power 2: -0.00 W
Output Bus Voltage 3: 5.11 V Output Shunt Voltage 3: 27.92 mV Output Load Voltage 3: 5.11 V Output Current 3: 279.20 mA Output Power 3: 1.43 W
|
|
|
Post by buckwestern on Oct 23, 2018 15:33:42 GMT -8
Does this SunControl replace the dual watchdog board as well?
|
|
|
Post by buckwestern on Oct 23, 2018 15:20:52 GMT -8
Great, thank you!
|
|
|
Post by buckwestern on Oct 22, 2018 5:04:18 GMT -8
I received a few more grover cables, so I am good to go whenever you're ready to send those guidelines, thank you!
|
|
|
Post by buckwestern on Oct 18, 2018 9:42:46 GMT -8
Based on our engineering / marketing meeting on last Friday, I'd say December for the latest update to GWP. If you are replacing SunAirPlus with SunControl, I can give you those guidelines now! BP I am doing exactly that. Let me know what I need to do here. Thank you.
|
|
|
Post by buckwestern on Oct 18, 2018 9:41:04 GMT -8
Good day,
I have been searching for this, but I cannot seem to find the answer:
How do I connect a SunControl in place of the existing SunAirPlus in my GroveWeatherPi build?
Thank you.
|
|
|
Post by buckwestern on Oct 15, 2018 16:06:52 GMT -8
Good evening,
When can we expect to see the redesign and updated wiring plan?
|
|
|
Post by buckwestern on May 16, 2018 9:18:23 GMT -8
Thank you. When is this expected to be released? The thread issues didn't appear for 2+ months, now they are every 2-3 days.
|
|
|
Post by buckwestern on May 11, 2018 5:16:36 GMT -8
Did this ever get released for the Pi?
|
|
|
Post by buckwestern on May 11, 2018 5:13:40 GMT -8
Good morning - any word about all of these thread errors? I experience this error and the AM2315 error and they all seem to be classified as 'thread errors'.
|
|
|
Post by buckwestern on May 6, 2018 18:50:28 GMT -8
Did this ever get resolved? I have exact issue. Only gets resolved with power cycle. Weather station has been working fine for 2+ months. now it won't work more than 2 days. All other sensors work fine.
|
|
|
Post by buckwestern on Aug 18, 2017 4:21:38 GMT -8
anyone?
|
|
|
Post by buckwestern on Aug 9, 2017 18:02:35 GMT -8
New, good batteries (tried 2 different batteries). Plugged the USB power control into the system (wasn't using it, just had SunAir hooked up) and now the system keeps shutting down due to low voltage. Why?
:
SunAirPlus Currents / Voltage ----------------- LIPO_Battery Bus Voltage: 0.00 V LIPO_Battery Shunt Voltage: -22.04 mV LIPO_Battery Lo
ad Voltage: -0.02 V LIPO_Battery Current 1: -220.40 mA Battery Power 1: 0.00 W
Solar Cell Bus Voltage 2: 1.05 V Solar Cell Shunt Voltage 2: 0.00 mV Solar Cell Load Voltage 2: 1.05 V Solar Cell Current 2: -0.00 mA Solar Cell Power 2: -0.00 W
Output Bus Voltage 3: 4.94 V Output Shunt Voltage 3: 30.24 mV Output Load Voltage 3: 4.94 V Output Current 3: 302.40 mA Output Power 3: 1.50 W
|
|