|
|
Post by triggerfish on Nov 7, 2019 3:34:24 GMT -8
I managed to tear off the RJ11 connector from the rain bucket  I am able to fit a new one, but I need the wire placement. Can yo tell me what wires goed where in the RJ11?
|
|
|
|
Post by SDL on Nov 8, 2019 6:52:10 GMT -8
|
|
|
|
Post by triggerfish on Nov 8, 2019 8:34:28 GMT -8
Hi,
I found the specs, which say pin 2 and 3, but if I look into the ripped off plug, I seem to see trace on pin 3 and 4. Which could make sense, since they are the two middel pins... Problem is there is a 4-pin RJ11 and a 6-pin RJ11... Physically I have the 6-pin, but then my observation on pin 3-4 contradicts the described pin 2-3...
|
|
|
|
Post by SDL on Nov 8, 2019 16:28:50 GMT -8
1 and 6 are left out on RJ11 plugs. So pins 1-4 start with second pin on an non-RJ11 plug.
BP
|
|
|
|
Post by triggerfish on Nov 9, 2019 4:06:13 GMT -8
1 and 6 are left out on RJ11 plugs. So pins 1-4 start with second pin on an non-RJ11 plug. BP Well, in datacomm they are actually used very much on 6-pin plugs. Were we don't need them, we use 4-pin. But I understand my confusion now. I'll just take the middle two  |
|
|
|
Post by SDL on Nov 10, 2019 7:41:08 GMT -8
Exactly! 6 Pin is Ethernet. 4 Pin is Phone Wires.
BP
|
|
|
|
Post by triggerfish on Nov 11, 2019 7:36:46 GMT -8
Exactly! 6 Pin is Ethernet. 4 Pin is Phone Wires. BP Ehhh, not exaclty, but never mind. I know which pins to use for the rain bucket |
|
|
|
Post by SDL on Nov 11, 2019 10:59:59 GMT -8
Triggerfish,
True. I am oversimplifying. Ohhhhmmm.
BP
|
|
I am able to fit a new one, but I need the wire placement. Can yo tell me what wires goed where in the RJ11?
