mp
New Member
Posts: 3
|
Post by mp on Jan 17, 2020 8:51:03 GMT -8
I have my Our Weather kit connected to a network with multiple SSID's. I need to change from one VLAN to another but cannot get my unit back into wifi setup mode due to upon powering up, my unit recognizes the known network and automatically connects. I cannot reset to default because my unit does not have a second button. I only have the reboot button (reset). Can I bring my unit back to default another way?
|
|
|
Post by SDL on Jan 19, 2020 11:02:10 GMT -8
|
|
mp
New Member
Posts: 3
|
Post by mp on Jan 23, 2020 10:52:57 GMT -8
What I thought I purchased through amazon has a GPIO0 button. The documentation that came with the unit shows a GPIUO0 button. Can I exchange what was delivered to me for what I thought I purchased? I need this functionality.
|
|
|
Post by SDL on Jan 23, 2020 12:31:38 GMT -8
Hi MP,
That is a mistake in the documentation. The V2 board removed that second button (which we now regret and next time we rev that board we are putting it back in).
We are answering you on Amazon.
BP
|
|