|
Post by Marc on Feb 4, 2020 12:22:21 GMT -8
Hi SDL,
Is there any documentation available for version 2 of the outweather Board? There are lots of new connectors and the existing documentation always refers to the esp8266 version of the board.
I saw that there are connectors to the adc and my questions is because i have already an airquality sensor if its possible to hook it up to the existing adc.
Also unclear for me are the ports on the right side of the esp32.
Please provide an updated documentation or schematics to understand this board.
Best regards Marc
|
|
|
Post by SDL on Feb 4, 2020 12:58:25 GMT -8
We will do that. V2 documentation update.
Air Quality sensor needs to be plugged into the V2 board. The external ADC uses the same I2C address so you can't use both.
BP
|
|
|
Post by Marc on Feb 4, 2020 13:04:33 GMT -8
We will do that. V2 documentation update. Air Quality sensor needs to be plugged into the V2 board. The external ADC uses the same I2C address so you can't use both. BP Ok where to put it? I have just the air quality sensor without the analog to digital converter What do you think how long the documentation update will take. For me a port specification will help alot because i will custoMize the existing software. Thanks Marc
|
|
|
Post by SDL on Feb 4, 2020 13:33:38 GMT -8
|
|
|
Post by Marc on Feb 4, 2020 14:20:20 GMT -8
Thanks that helps but brings up the next issue. There must be some error in the code of esp32. Check line 667 and 670. according to the code your board contains two adcs the 1015 for the windvane/aneometer and the 1115 for the air polition sensor. Problem is both are defined for the same i2c address in the code. If i do not change this and compile this i do not get a wind and direction reading. What is the address of both adcs? My vane is working because led is flashing if i turn it but i do not get a reading. Best regards Marc
|
|
|
Post by SDL on Feb 4, 2020 15:03:43 GMT -8
Now, that is absolutely crazy! I'll check on it later today when I get back to the office.
What version of code are you running?
BP
|
|
|
Post by Marc on Feb 5, 2020 0:36:26 GMT -8
Now, that is absolutely crazy! I'll check on it later today when I get back to the office. What version of code are you running? BP Actual version from github. Check your sources online. Wind / rain is not working with that code. If i connect the air polution sensor it detects it but the actual reading of the air polution sensor is from the wind dirction sensor. If i turn it the air polution value changes. There are some bugs in your code in my opinion.
|
|
|
Post by SDL on Feb 5, 2020 9:18:20 GMT -8
Give me the exact library you are using. The link please. And check your code version.
You are running a WeatherPlus V2 board, correct? And the OurWeather software correct?
This is sparking a memory. I will be able to look at it this morning, if you can give me the exact link you are using and verify the code version.
BP
|
|
|
Post by Marc on Feb 5, 2020 10:26:09 GMT -8
|
|
|
Post by Marc on Feb 5, 2020 10:29:01 GMT -8
I compiled the version above from github and flashed it on the board. Disabled the display thats the only thing what i changed because i dont use the oled.
|
|
|
Post by Marc on Feb 6, 2020 11:34:25 GMT -8
Any conclusion whats wrong? Is it a bug ? Want to bring my weather station outside on the weekend to replace my existing one Thanks Marc
|
|
|
Post by SDL on Feb 6, 2020 11:49:06 GMT -8
Hmm. I'm looking for the WeatherPlusV2 specification. I'll find it when I get back to the office.
BP
|
|
|
Post by Marc on Feb 6, 2020 13:36:17 GMT -8
Hmm. I'm looking for the WeatherPlusV2 specification. I'll find it when I get back to the office. BP Ok you spoke about something which came to your mind so i thought something is wrong in the software...
|
|
|
Post by SDL on Feb 7, 2020 14:40:33 GMT -8
|
|
|
Post by Marc on Feb 7, 2020 14:51:04 GMT -8
Thanks that clears a bit but software is still not working, i dont get any reading from wind vane/rain gauge. The software is thinking a air quality sensor is attached even if its not, if i turn the wind direction the value of the air wuality is changing. Can you pmease check the software. Leds onboard are flashing if i turn the wind vane or the rain bucket.
|
|