|
Post by 556duckvader on Feb 8, 2020 19:08:28 GMT -8
I am using a SHT30 and a BMP280 and the BMP280 temp is reading -197F The baro appears to be reading fine. The SHT30 is working as expected. If the BMP280 is faulty what sensor is commonly used to measure barometric pressure?
Current Weather As Of: 2020-02-08 21:06:57
Outdoor Temperature: 68.09 F
Outdoor Humidity: 39.34 %
Indoor Temperature: -198.11 F
Barometric Pressure: 30.66 in
Current Wind Speed : 0.00 mph
Current Wind Gust: 0.00 mph
Current Wind Direction: 0 Degrees
Rain Total: 0.00 in
AQS Quality: Fresh Air
AQS Value: 3136
Alexa Enabled: Disabled
Last Lightning Distance:
Last Lightning TimeStamp:
Lightning Count Since Bootup: 0
Page Version: 4.0
|
|
|
Post by SDL on Feb 9, 2020 9:46:19 GMT -8
What software are you using? To me this looks like some kind of translation error. What does the OLED say?
BP
|
|
|
Post by 556duckvader on Feb 9, 2020 10:48:51 GMT -8
What software are you using? To me this looks like some kind of translation error. What does the OLED say? BP I am running V55 and the OLED says the same thing.
|
|
|
Post by SDL on Feb 9, 2020 11:07:58 GMT -8
Sounds like a bad board then. Thanks for the information.
Here is an RMA.
SwitchDoc Labs RMA#020920-01 909 S Shelley Lake Lane Spokane Valley, WA 99037
Since today is a Sunday (and Laurie is not in the office), how about you PM me your shipping address and we will cross ship.
BP
|
|
|
Post by 556duckvader on Feb 9, 2020 11:11:50 GMT -8
Sounds like a bad board then. Thanks for the information. Here is an RMA. SwitchDoc Labs RMA#020920-01 909 S Shelley Lake Lane Spokane Valley, WA 99037 Since today is a Sunday (and Laurie is not in the office), how about you PM me your shipping address and we will cross ship. BP Thanks PM sent.
|
|