david
Junior Member
Posts: 95
Raspberry Pi: Yes
|
Post by david on Mar 9, 2020 5:04:17 GMT -8
I am changing from a v1 to v2. I am having a hard time to get it going. I can not get it to save the wifi setup info. I can connect to the OurWeather wifi and input the system name, ssid , password and altitude (on v56), browser page changes to "saving ..." but it does not save and will not then connect to my wifi. Any ideas?
|
|
david
Junior Member
Posts: 95
Raspberry Pi: Yes
|
Post by david on Mar 9, 2020 7:21:40 GMT -8
Ok, now I am really going crazy. On about attempt #30 or so it did finally seam to save info and reported a IP of 192.168.1.228. I did restart with reset button and was good. Then I unplugged power supply and replugged it in and all still ok, reporting IP 192.168.1.228. Then I unplugged and took outside and plugged in weather rack and plugged in power and it lost the info. Went back to the wifi setup screen (192.168.4.1). Help?
|
|
david
Junior Member
Posts: 95
Raspberry Pi: Yes
|
Post by david on Mar 9, 2020 7:24:48 GMT -8
Ok, now I just plugged in power supply again in anticipation of doing wifi set up again but it did seem to connect to my wifi again (192.168.1.228).  |
|
david
Junior Member
Posts: 95
Raspberry Pi: Yes
|
Post by david on Mar 9, 2020 7:39:12 GMT -8
Is the wifi really that weak without the extra antenna? I took outside and moved it 3 feet closer to the place the AP is inside the house and now seems to be connected ok.
|
|
david
Junior Member
Posts: 95
Raspberry Pi: Yes
|
Post by david on Mar 9, 2020 8:59:14 GMT -8
I'll order the extra antenna.
|
|
|
|
Post by SDL on Mar 10, 2020 16:13:34 GMT -8
|
|
david
Junior Member
Posts: 95
Raspberry Pi: Yes
|
Post by david on Mar 11, 2020 4:01:57 GMT -8
Thanks
|
|
david
Junior Member
Posts: 95
Raspberry Pi: Yes
|
Post by david on Mar 11, 2020 9:33:02 GMT -8
I started 3 threads for what now looks like all the same issue, so will continue discussion in RH_RF95.h thread only.
|
|
