|
Post by rnbowman on Mar 15, 2020 7:44:53 GMT -8
My “OurWeather” station has been running reliably for several months, reporting to Blynk and WeatherUnderground. I also occasionally check weather stats on the OurWeather webpage, especially while I am working on my desktop computer. I am using an OurWeather V1 board and ver. 036. I have not changed anything for the last few months. I can no longer see any data displayed on the OurWeather webpage. I have restarted my V1 board several times, recorded the IP address and entered this into the OurWeather webpage repeatedly. I even tried submitting all the IP addresses used by my router; still no data appears on the OurWeather webpage, even though the page, itself, appears normally. In short, no data from my weather station is posted to the OurWeather webpage. Is the OurWeather webpage dead? What is interesting is that current data from my weather station continues to be updated and correctly posted to both Blynk and WeatherUnderground without any problems. The problem is not with my station hardware, V1 board, nor communication with SwitchDoc servers.
What gives with the OurWeather webpage?
|
|
|
Post by SDL on Mar 16, 2020 13:51:20 GMT -8
Boy, now that is interesting. Try typing in: 192.168.1.10 (replacing the IP address with your system IP address) and see if it works. You can ping that address to see if it has changed. ping 192.168.1.10 (again putting in your unit). I'd guess your IP changed for some reason. BP
|
|
|
Post by rnbowman on Mar 17, 2020 8:44:59 GMT -8
UPDATE………. I checked everything about my system and network, and all seemed OK. I could still see my currently updated station data on Blynk and WeatherUnderground. I could go to the OurWeather webpage and see the normal page, but none of my data was posted. So…………. I restarted my router. Problem FIXED. I can now see my station data properly displayed on the OurWeather webpage. Guess I should have restarted the router from the very beginning.
I’m still confused by all of this. How could it be that my station data was continuing to be sent to SwitchDoc labs servers (and on to Blynk and WU), yet the data could not be returned to me on the webpage, or at least, I could not see the data only? There’s always new stuff to learn.
|
|
|
Post by SDL on Mar 19, 2020 13:44:24 GMT -8
Now that is totally new to me. I'm not sure how your router could not properly route to the browser and hose the browser up while things were routing properly elsewhere.
BP
|
|