|
Post by sibrown on May 27, 2020 11:53:42 GMT -8
Could you point me in the correct direction for the calibration file/ lines to adjust the rain bucket size and Anemometer wind speeds. This is to use different sensors with the SkyWeather_Pi.
I have some older instruments which I have got working but are not reading the correct measurements
SB
|
|
|
Post by SDL on May 29, 2020 12:01:50 GMT -8
It's in the WeatherRack drivers. That is where the numbers are generated.
SDL_Pi_SkyWeather/SDL_Pi_WeatherRack/SDL_Pi_WeatherRack.py
BP
|
|