Post by SDL on Aug 2, 2020 9:39:17 GMT -8
This is the place where we will report all currently known bugs and provide release information for the Smart Garden System.
Current Version:
Raspberry Pi:
Version 020 - September 4, 2020 - Added DOW filtering for Orchid Growing Support
SGS ESP32 Extender:
Version EV025 - August 13, 2020 - Current Extender Software
github.com/switchdoclabs/SDL_Pi_SmartGardenSystem2
Current Bugs:
OPEN - 041321-1 - EV025 - Soft fail on MQTT loss. Not hard reboot on Extender.
OPEN - 031521-2 - V020/EV025 - Recover light / pump state on reboot of SGS Extender
OPEN - 031521-1 - V020 - Programmatically increase Frequency of IH Indoor temperature writes
CLOSED - 081220-1 V016 - testMoistureSensor.py fails to read moisture sensors.
CLOSED - 080120-1 - V015- - On the Raspberry Pi 4B Rev 1.2, a change in the hardware has broken the Pixel RGBW support. If you see the error of Hardware not available, upgrade to V016
Installing New Version:
go to your SDL_Pi_SmartGardenSystem2 directory and type:
git pull
That will update you to the latest version.
Older Versions:
Version 019 -August 17, 2020 Fixed Activation Logging info and added Indoor T/H Page to dash_app
Version 017 - August 12, 2020 - Fixed testMoistureSensors.py problem.
Verison 016 - August 10, 2020 - Fixed Pi4 Rev2 problem. Disabled use of Pixels on Raspberry Pi by default. Will address later.
Version 014 - July 14, 2020 - First Release Version
Version 013 - July 13, 2020 - Release Candidate One
Version 005 - June 5, 2020 - More modifications to dash_app and wireless
Version 005 - June 3, 2020 - Added GardenCam / WeatherSTEM code
Version 003 - May 11, 2020 - Added dashboard code
Current Version:
Raspberry Pi:
Version 020 - September 4, 2020 - Added DOW filtering for Orchid Growing Support
SGS ESP32 Extender:
Version EV025 - August 13, 2020 - Current Extender Software
github.com/switchdoclabs/SDL_Pi_SmartGardenSystem2
Current Bugs:
OPEN - 041321-1 - EV025 - Soft fail on MQTT loss. Not hard reboot on Extender.
OPEN - 031521-2 - V020/EV025 - Recover light / pump state on reboot of SGS Extender
OPEN - 031521-1 - V020 - Programmatically increase Frequency of IH Indoor temperature writes
CLOSED - 081220-1 V016 - testMoistureSensor.py fails to read moisture sensors.
CLOSED - 080120-1 - V015- - On the Raspberry Pi 4B Rev 1.2, a change in the hardware has broken the Pixel RGBW support. If you see the error of Hardware not available, upgrade to V016
Installing New Version:
go to your SDL_Pi_SmartGardenSystem2 directory and type:
git pull
That will update you to the latest version.
Older Versions:
Version 019 -August 17, 2020 Fixed Activation Logging info and added Indoor T/H Page to dash_app
Version 017 - August 12, 2020 - Fixed testMoistureSensors.py problem.
Verison 016 - August 10, 2020 - Fixed Pi4 Rev2 problem. Disabled use of Pixels on Raspberry Pi by default. Will address later.
Version 014 - July 14, 2020 - First Release Version
Version 013 - July 13, 2020 - Release Candidate One
Version 005 - June 5, 2020 - More modifications to dash_app and wireless
Version 005 - June 3, 2020 - Added GardenCam / WeatherSTEM code
Version 003 - May 11, 2020 - Added dashboard code