jorg
New Member
Posts: 15
Raspberry Pi: Yes
|
Post by jorg on Sept 10, 2020 0:16:24 GMT -8
When starting SkyWeather.py it shows
DS3231: Not Present
The documentation shows Real Time Clock 0x68 Bus 0 Real Time Clock DS3231 RTC
When trying to debug
ds3231 = SDL_DS3231.SDL_DS3231(1, 0x68)
the error message is
I/O error(121): Remote I/O error
How do I debug this?
|
|
|
Post by SDL on Sept 12, 2020 12:58:54 GMT -8
First of all, do you have a DS3231 connected?
Try running "sudo i2cdetect -y 1" and post the results here.
BP
|
|
jorg
New Member
Posts: 15
Raspberry Pi: Yes
|
Post by jorg on Sept 22, 2020 12:02:52 GMT -8
Here the output: 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- 44 -- -- -- 48 -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- 73 -- -- -- 77
|
|
|
Post by SDL on Sept 25, 2020 16:50:24 GMT -8
Sounds like you don't have a DS3231 attached. It isn't required.
BP
|
|
jorg
New Member
Posts: 15
Raspberry Pi: Yes
|
Post by jorg on Sept 26, 2020 19:37:09 GMT -8
|
|
|
Post by SDL on Sept 29, 2020 10:17:32 GMT -8
Which version of OurWeather do you have?
Send a picture of the board.
BP
|
|