|
Post by SDL on Jun 28, 2021 9:27:17 GMT -8
Cut out all but the last 100 or so lines and post them.
BP
|
|
|
Post by Powderjockey on Jun 28, 2021 16:23:23 GMT -8
Cut out all but the last 100 or so lines and post them. BP nohup.out1 (48.95 KB) The temperature stopped at 7:04 21-06-28. It is still 17.5 according to the SkyWeather, but in reality it is 38 degrees. The above nohut.out1 is from 07:00 to about 07:07. nohup.out2 (6 KB) this file is about the last 250 lines of the fie.
|
|
|
Post by SDL on Jun 30, 2021 14:54:24 GMT -8
|
|
smurphy
Full Member
Posts: 169
Raspberry Pi: Yes
Other Device: many ...
|
Post by smurphy on Jul 2, 2021 2:09:47 GMT -8
I have that too on a regular base. Temperature is stuck (dead line). I have to actually stop the weather station, cut power for 20secs, then power it on again. Then it works. FYI - I have no "low power" message/condition showing up. Because my station is outside and the power (voltage) drop would be too important on a 80feet power line, I feed it with 12V DC and added a small DC 12V/DC 5V power converter into the stations. The DC/DC converter accepts everything from 30 to 6V to convert it to 5V. So I have a stable 5V for the SkyWeather station. I have not identified any "real" pattern. Sometimes it happens 3 days in a row I have to restart the SkYWeather. Sometimes it runs fine for 3 months ... (Hot as cold days). I too have the AM2315 sensor. Shall I too apply for an exchange? I think I'll rather get one locally (Carbone footprint to send it to Europe would be too high). Any idea on how to identify the bad units? Or test for this?
Or rather - what would it take to replace it with a SHT30 unit on a SkyWeather? Any instructions/details available?
|
|
|
Post by Powderjockey on Jul 2, 2021 7:55:54 GMT -8
Yes I did. Is this a valid option? Do you want me to send mine back? Need an RMA number? I restarted just fine on June 30th and the unit was working fine until last night at 6:14 pm when it flat lined at 32.2 degrees and is still at that temperature this morning.
|
|
|
Post by SDL on Jul 7, 2021 10:04:27 GMT -8
Sounds like the issue. Send it in per the posting and we will take care of it.
BP
|
|
|
Post by Powderjockey on Jul 7, 2021 13:59:50 GMT -8
Sounds like the issue. Send it in per the posting and we will take care of it. BP Done on its way yesterday (21-07-06) Thanks
|
|