How is Weather board (0011-051519-01) connected to Pi2B?

From github, I'm using "SDL_Pi_Weatherbaord". Sensors connected to PiWeather board correctly, but syntax error shown below . . . help please

pi@raspberrypi:~ $ sudo python WeatherBoard.py
Traceback (most recent call last):
File "WeatherBoard.py", line 40, in <module>
import SDL_Pi_WeatherRack as SDL_Pi_WeatherRack
File "./SDL_Pi_WeatherRack/SDL_Pi_WeatherRack.py", line 26, in <module>
from Adafruit_ADS1x15 import ADS1x15
File "./Adafruit_ADS1x15/Adafruit_ADS1x15.py", line 5, in <module>
from Adafruit_I2C import Adafruit_I2C
File "./Adafruit_ADS1x15/Adafruit_I2C.py", line 1
../Adafruit_I2C/Adafruit_I2C.py
^
SyntaxError: invalid syntax

Folder Adafruit_ADS1x15/Adafruit_I2C.py has just 1 line . . . . ../Adafruit_I2C/Adafruit_I2C.py

Please help. thanks

Thanks much, removed directory and successfully got code using git clone . . . but


pi@raspberrypi:~/SDL_Pi_WeatherBoard $ sudo python WeatherBoard.py
Traceback (most recent call last):
File "WeatherBoard.py", line 139, in <module>
weatherStation = SDL_Pi_WeatherRack.SDL_Pi_WeatherRack(anemometerPin, rainPin, 0,0, SDL_MODE_I2C_ADS1015)
File "./SDL_Pi_WeatherRack/SDL_Pi_WeatherRack.py", line 186, in __init__
self.ads1015 = ADS1x15(ic=ADS1015, address=0x48)
File "./Adafruit_ADS1x15/Adafruit_ADS1x15.py", line 138, in __init__
self.i2c = Adafruit_I2C(address)
File "./Adafruit_ADS1x15/Adafruit_I2C.py", line 43, in __init__
self.bus = smbus.SMBus(busnum if busnum >= 0 else Adafruit_I2C.getPiI2CBusNumber())
IOError: [Errno 2] No such file or directory

Please help again.

I'm using Raspberry Pi 2 Model B Rev 1.1 with 1GB RAM. Ran raspi-config to enable I2c. then script executed without error except below . . . very start of output

pi@raspberrypi:~/SDL_Pi_WeatherBoard $ sudo python WeatherBoard.py
Error accessing 0x48: Check your I2C address
Error accessing 0x48: Check your I2C address

Weather Board Demo / Test Version 1.6 - SwitchDoc Labs

pi@raspberrypi:~ $ sudo i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- 73 -- -- -- --

Why only 1 address detected? Anemometer and rain gauge displays but why no wind direction?

Grove Cable from J4 of PiWeatherBoard (I2C) connects to Pin#1 (red), Pin#3 (white), Pin#5 (yellow) and Pin#6 (black)

Thanks for any help.

Program Started at:2021-01-15 21:19:42

----------------------
DS3231: Not Present
BMP280: Not Present
FRAM: Not Present
HTU21DF: Not Present
AM2315: Not Present
ADS1015: Not Present
ADS1115: Not Present
AS3935: Not Present
OLED: Not Present
SunAirPlus: Not Present
WXLink: Not Present

Got it working . . . somewhat. But definitely got test results above.

Could I use the 5v instead of 3.3v . . . any better?

Thanks much . . . onto working with output in mariadb

Thanks much for your help so far. I keep making progress after your replies. . . please continue.

Testing of WeatherRack is successful . . . see immediately below, but unexpected output to screen running
sudo pigpiod
sudo python SkyWeather.py

. . . See below ==================. BTW: Besides WeatherRack sensors, I only have BME680. WeatherData table is empty

pi@raspberrypi:~/SDL_Pi_SkyWeather $ sudo python testWeatherRack2.py
----------------------------------------
Rain Speed Dir Volts
Rain Total= 0.00 in
Wind Speed= 0.00 MPH
(' value = ', 3062.0625)
(' voltageValue = ', 3.0620625)
Wind Direction= 270.00 Degrees
Wind Direction Voltage= 3.062 V
-----------------
----------------------------------------
Rain Speed Dir Volts
Rain Total= 0.00 in
Wind Speed= 0.00 MPH
(' value = ', 3062.25)
(' voltageValue = ', 3.06225)
Wind Direction= 270.00 Degrees
Wind Direction Voltage= 3.062 V
-----------------
^CTraceback (most recent call last):
File "testWeatherRack2.py", line 116, in <module>
time.sleep(20.0)
KeyboardInterrupt

=============================================================================================
pi@raspberrypi:~/SDL_Pi_SkyWeather $ sudo pigpiod
pi@raspberrypi:~/SDL_Pi_SkyWeather $ sudo python SkyWeather.py
mmal: mmal_vc_component_create: failed to create component 'vc.ril.camera' (1:ENOMEM)
mmal: mmal_component_create_core: could not create component 'vc.ril.camera' (1)
('after bme680', True)
as3935 start
I/O error(121): Remote I/O error
I/O error(121): Remote I/O error
after SHT30
^C
SkyWeather Weather Station Version 055 - SwitchDoc Labs


Program Started at:2021-01-27 00:49:53

----------------------
I2C Mux - TCA9545: Present
BME680: Present
BMP280: Not Present
SkyCam: Not Present
DS3231: Not Present
HDC1080: Not Present
SHT30: Not Present
AM2315: Not Present
ADS1015: Not Present
ADS1115: Present
AS3935: Not Present
OLED: Not Present
SunAirPlus/SunControl: Not Present
SolarMAX: Not Present
SI1145 Sun Sensor: Not Present
TSL2591 Sun Sensor: Not Present
DustSensor: Not Present
WXLink: Not Present
Dual SolarMAX/WXLink: Not Present

UseBlynk: Not Present
UseMySQL: Present
Check WLAN: Not Present
WeatherUnderground: Not Present
UseWeatherStem: Not Present
----------------------
sendmail exception raised
-----------------
Sample and Display
-----------------
-----------------
Weather Sampling
-----------------
(' value = ', 3062.4375)
(' voltageValue = ', 3.0624375)
-----------------
-----------------
SunAirPlus Not Present
-----------------
-----------------
-----------------
-----------------
AS3935 Lightning Detector Not Present
-----------------
-----------------
-----------------
Sample and Display Done
-----------------
taking SkyPicture
-----------------
Scheduled Jobs
-----------------
Jobstore default:
patTheDog (trigger: interval[0:00:10], next run at: 2021-01-27 00:50:05 GMT)
checkForButtons (trigger: interval[0:00:10], next run at: 2021-01-27 00:50:05 GMT)
sampleAndDisplay (trigger: interval[0:00:30], next run at: 2021-01-27 00:50:25 GMT)
tick (trigger: interval[0:01:00], next run at: 2021-01-27 00:50:55 GMT)
writeWeatherRecord (trigger: interval[0:05:00], next run at: 2021-01-27 00:54:55 GMT)
writePowerRecord (trigger: interval[0:05:00], next run at: 2021-01-27 00:54:55 GMT)
updateRain (trigger: interval[0:05:00], next run at: 2021-01-27 00:54:55 GMT)
checkForShutdown (trigger: interval[0:05:00], next run at: 2021-01-27 00:54:55 GMT)
doAllGraphs (trigger: interval[0:15:00], next run at: 2021-01-27 01:04:55 GMT)
barometricTrend (trigger: interval[0:15:00], next run at: 2021-01-27 01:04:55 GMT)
WLAN_check (trigger: interval[0:30:00], next run at: 2021-01-27 01:19:55 GMT)
statusRain (trigger: interval[1:00:00], next run at: 2021-01-27 01:49:55 GMT)
rebootPi (trigger: cron[day='5-30/5', hour='0', minute='4'], next run at: 2021-01-30 00:04:00 GMT)
-----------------
------Patting The Dog-------
------Patting The Dog-------
-----------------
Sample and Display ------Patting The Dog-------

-----------------
-----------------
Weather Sampling
-----------------
(' value = ', 3062.25)
(' voltageValue = ', 3.06225)
-----------------
-----------------
SunAirPlus Not Present
-----------------
-----------------
-----------------
-----------------
AS3935 Lightning Detector Not Present
-----------------
-----------------
-----------------
Sample and Display Done
-----------------
^CTraceback (most recent call last):
File "SkyWeather.py", line 1909, in <module>
time.sleep(1.0)
KeyboardInterrupt

Thanks for the reply, but no change in screen output and no records in WeatherData

1) yes, database was setup before I ran SkyWeather.py with results above (executed WeatherPiStructure.sql, tables created, but no records in WeatherData table). I'm very familiar with SQL language on mariadb.

- How else do I turn on debug?

2) in conflocal file, I have parameter "SWDEBUG = True", I'm guessing that is how to turn-on debug in SkyWeather.py

3) in conflocal file, I have parameter "enable_MySQL_Logging = True, MySQL_Password = matches my own password I verified works within mariadb.

4) Curiously, mysql -u root -p fails unless I place sudo in front "mysql -u root -p" . . . then ok

Your MariaDB connection id is 38
Server version: 10.3.27-MariaDB-0+deb10u1 Raspbian 10

My entire conflocal.py file below

#
#
# configuration file - contains customization for SkyWeather system
#

# it is a good idea to copy this file into a file called "conflocal.py" and edit that instead of this one. This file is wiped out if you update SkyWeather.

SWDEBUG = True

SWVERSION = "000" # set in SkyWeather.py
import uuid

# printing the value of unique MAC
# address using uuid and getnode() function
MACADDRESS = hex(uuid.getnode())

mailUser = "Don"
mailPassword = "yourmailpassword"

notifyAddress ="you@example.com"

fromAddress = "yourfromaddress@example.com"

enableText = False
textnotifyAddress = "yourphonenumber@yourprovider"

#MySQL Logging and Password Information

enable_MySQL_Logging = True
MySQL_Password = my unique password that works with mysql

# modify this IP to enable WLAN operating detection - search for WLAN_check in SkyWeather.py
enable_WLAN_Detection = False
PingableRouterAddress = "192.168.1.1"

# LED configuration (on use on a Raspberry Pi 3B+)

runLEDs = False

# WXLink and SolarMAX configuration
SolarMAX_Present = False
Dual_MAX_WXLink = False

# SolarMAX_Type = "LEAD" for SolarMAX Lead Acid
# SolarMAX_Type = "LIPO" for SolarMAX LiPo
SolarMAX_Type = ""

# WeatherSTEM configuration

USEWEATHERSTEM = False
INTERVAL_CAM_PICS__SECONDS = 60
STATIONMAC = MACADDRESS
STATIONKEY="XXXXYYYY"
STATIONHARDWARE=""


# WeatherUnderground Station

WeatherUnderground_Present = False
WeatherUnderground_StationID = "KWXXXXX"
WeatherUnderground_StationKey = "YYYYYYY"

############
# Blynk configuration
############

USEBLYNK = False
BLYNK_AUTH = 'xxxxx'
BLYNK_URL = 'http://blynk-cloud.com/'

############
# AS3935 Lightning Configuration
############
# format: [NoiseFLoor, Indoor, TuneCap, DisturberDetection, WatchDogThreshold, SpikeDetection]
AS3935_Lightning_Config = [2,1,3,0,3,3]



# for barometeric pressure - needed to calculate sealevel equivalent - set your weatherstation elevation here

BMP280_Altitude_Meters = 328.0

# device present global variables


Camera_Present = False
TCA9545_I2CMux_Present = True
SunAirPlus_Present = False
AS3935_Present = False
DS3231_Present = False
BMP280_Present = False
BME680_Present = True
HDC1080_Present = False
SHT30_Present = False
AM2315_Present = False
ADS1015_Present = True
ADS1115_Present = False
OLED_Present = False
OLED_Originally_Present = False
WXLink_Present = False
Sunlight_Present = False
TSL2591_Present = False
DustSensor_Present = False

# set Sunlight High Gain (indoors - 1) or Low Gain (outdoors - 0)
Sunlight_Gain = 0


# if the WXLink has stopped transmitting, == False
WXLink_Data_Fresh = False
WXLink_LastMessageID = 0

# Pin definitions
pixelPin = 21

DustSensorPin = 19
DustSensorPowerPin = 26

#WeatherRack
anemometerPin = 20
rainPin = 13


SHT30GSPIN = 6
AM2315GSPIN = 6

# for fan
GPIO_Pin_PowerDrive_Sig1 = 5
GPIO_Pin_PowerDrive_Sig2 = 5 # To avoid stepping on GPIO 6

WATCHDOGTRIGGER = 4