|
Post by pagerman on Apr 8, 2021 10:09:07 GMT -8
So I'm trying to print the files for the Wireless Lightning Detector that is on it's way to me. I am missing the following file: Part Q
Saucer Lightning Housing Bottom
Also, the joiners do not screw into the box plug. Either the joiners are too large or the box plug is too small. The box plug fits the hole on the box, so I assume the joiners are scaled incorrectly?
Thanks
|
|
|
Post by pagerman on Apr 8, 2021 10:12:11 GMT -8
Also, what is the difference between: TB Bottom.stl and Bracket.stl
They look the same.
|
|
|
Post by SDL on Apr 8, 2021 13:24:44 GMT -8
I have some clean up to to and add a file. will do in about 1 and 1/2 hour. Use TB Bottom. It has a bigger top.
Depending on your 3D printer, you may have to do a little filing. First of all, try printing the Box plug with the screw hole pointed up. I've seen that fixing those issues. we print ours that way.
BP
|
|
|
Post by pagerman on Apr 8, 2021 14:43:37 GMT -8
I have some clean up to to and add a file. will do in about 1 and 1/2 hour. Use TB Bottom. It has a bigger top. Depending on your 3D printer, you may have to do a little filing. First of all, try printing the Box plug with the screw hole pointed up. I've seen that fixing those issues. we print ours that way. BP Thanks!
|
|
|
Post by pagerman on Apr 8, 2021 17:28:01 GMT -8
Updated yet? I don't see a change.
|
|
|
Post by SDL on Apr 9, 2021 11:04:27 GMT -8
It's updated now.
BP
|
|