|
Post by pagerman on May 6, 2021 5:13:16 GMT -8
Ok. Stopped updating WeatherSTEM at 8:13PM last night. dash_app still working. VNC not working. SSH is working. Wunderground upload still working.
I'm going to let it keep running until dash_app and/or Wunderground stops.
|
|
|
Post by pagerman on May 6, 2021 6:23:00 GMT -8
So, interestingly enough, I was basing my "crashes" on the fact that VNC and WeatherSTEM stopped working. Wunderground is still working even though VNC and WeatherSTEM are not.
dash_app is working, however the photo is not updating.
|
|
|
Post by pagerman on May 6, 2021 7:44:29 GMT -8
Maybe we should start over and address each issue separately.......
|
|
|
Post by pagerman on May 6, 2021 17:02:20 GMT -8
Wunderground is running just fine. Updating all the data correctly. dash_app is fine.
WeatherSTEM is all kinds of off. None of the data matches Wunderground. The photo hasn't updated since 8:13pm last night.
VNC is not working. SSH is working.
The WeatherData log shows uploading only every 15 mins (so that's WU, not STEM which should be every minute.)
Let me know what log you want to see.
|
|
|
Post by pagerman on May 7, 2021 4:33:31 GMT -8
Wunderground is still getting updates every 15 mins.
|
|
dow4hurst
Full Member
SkyWeather2 Newbie
Posts: 117
|
Post by dow4hurst on May 7, 2021 7:42:01 GMT -8
Pagerman, You do have a lot of SDR restarts in your database log output. I think you already put the antenna on a thin metal plate, right? Also, weatherstem really does test the reliability of lots of small uploads to an external site. However, it failed on the cellular network too. I had two problems going on in my system. If you turn off updating to weatherstem for now and keep the system in debug mode, will you continue having crashes of parts of the system? Would you try that? Dow
|
|
|
Post by pagerman on May 8, 2021 16:34:25 GMT -8
Pagerman, You do have a lot of SDR restarts in your database log output. I think you already put the antenna on a thin metal plate, right? Also, weatherstem really does test the reliability of lots of small uploads to an external site. However, it failed on the cellular network too. I had two problems going on in my system. If you turn off updating to weatherstem for now and keep the system in debug mode, will you continue having crashes of parts of the system? Would you try that? Dow Running without the WeatherSTEM updates right now. I'll let you know.
|
|
|
Post by pagerman on May 9, 2021 11:19:32 GMT -8
Still running without uploading to WeatherSTEM. VNC is still running fine. Wunderground is fine. SSH is fine.
Been running fine since 5-8 at 7:33am. This is the longest it has been up and running since I bought it.
|
|
|
Post by pagerman on May 10, 2021 4:29:48 GMT -8
Everything is still running 100%. It has to be either WeatherSTEM itself or the camera upload
|
|
|
Post by SDL on May 10, 2021 6:50:24 GMT -8
WeatherSTEM is more demanding of the network than WU. This still kind of points to some kind of a network problem.
Are you going to add your camera to WU? That will be interesting.
BP
|
|
|
Post by pagerman on May 11, 2021 13:16:03 GMT -8
WeatherSTEM is more demanding of the network than WU. This still kind of points to some kind of a network problem. Are you going to add your camera to WU? That will be interesting. BP But what I don't get is the fact that the other 55 (seriously) WiFi devices connected to my mesh network all work 100% including several other Pi based devices - one of which is uploading data 24/7 for audio streams.......
|
|
|
Post by pagerman on May 11, 2021 14:33:41 GMT -8
And it crashed the same exact way using a cellular modem where it was the only device.
|
|
brenna
New Member
Posts: 10
Raspberry Pi: Yes
|
Post by brenna on May 11, 2021 15:08:31 GMT -8
WeatherSTEM is more demanding of the network than WU. This still kind of points to some kind of a network problem. Are you going to add your camera to WU? That will be interesting. BP Uploading camera images to WU would also help determine if it was a camera issue or a WeatherSTEM upload issue.
|
|
|
Post by pagerman on May 12, 2021 18:33:25 GMT -8
See other thread. It crashed. Wunderground data was updating, but I couldn't get to the Pi via VNC, SSH or dash_app. Had to power off/on. The cam files were saving in the /static folder.
|
|
|
Post by pagerman on May 12, 2021 18:37:20 GMT -8
pi@SwitchDocLabs:~ $ cd SDL_Pi_SkyWeather2 pi@SwitchDocLabs:~/SDL_Pi_SkyWeather2 $ sudo python3 testSkyCamera.py ./SkyWeather2.JSON File exists config.USEWEATHERSTEM is false, will not attempt to publish to WeatherSTEM config.WeatherUnderground_Camera_Present is false, will not attempt to publish image to WeatherUnderground -------------------- Taking SkyCam Picture -------------------- -------------------- SkyCam Picture Taken -------------------- mySkyCameraText= SkyWeather2 V001 12-May-2021 21:35:43 Wind Speed: 0.0MPH Wind Gust: 0.0MPH Temp: 32.0 F pi@SwitchDocLabs:~/SDL_Pi_SkyWeather2 $
|
|