|
Post by pagerman on Apr 23, 2021 5:41:40 GMT -8
I have the laser AQI that is attached directly to the SkyWeather2 base station. I'm getting either very low readings or none at all. See the graph below. Thanks Attachments:
|
|
dow4hurst
Full Member
SkyWeather2 Newbie
Posts: 117
|
Post by dow4hurst on Apr 23, 2021 9:55:00 GMT -8
Pagerman, Either your air has gotten cleaned up by rain or something is up with the sensor. Below is my AQI from the SkyWeather2 box on my desk at home. I opened the windows on the April 20th. You can see the initial spike of dust and pollen blowing around in my office in the middle of day on the 21st. Afterwards, the data smooths out a bit and I don't get a repeat spike. We haven't had rain for a week and have had cool temps during this period of data collection. The real smooth data at the beginning of the graph is what I have seen for weeks since the windows were closed and there was no strong airflow. Dow Attachments:
|
|
|
Post by SDL on Apr 23, 2021 11:33:35 GMT -8
pagerman,
What is going on form April 22 on? It's odd it is flat. Rest looks OK.
Did you power on/off your system? Just a thought.
BP
|
|
|
Post by pagerman on Apr 24, 2021 6:37:48 GMT -8
pagerman, What is going on form April 22 on? It's odd it is flat. Rest looks OK. Did you power on/off your system? Just a thought. BP Rebooted. Will check again. Is it normal for the dash_app weather data to only update every 15mins? The photo updates every minute
|
|
|
Post by pagerman on Apr 24, 2021 11:20:58 GMT -8
Restart resulted in the AQI staying at 0. And it also resulted in a full crash of the system YET AGAIN within 2 hours. I'm about ready to give up. Attachments:
|
|
|
Post by pagerman on Apr 24, 2021 12:56:20 GMT -8
Power off/on. AQI up to 80 now. We will see how long the station stays up.
|
|
|
Post by SDL on Apr 24, 2021 14:35:29 GMT -8
I "wonder" if this is a power supply quality issue. Tell me what you are doing here.
15 minutes is normal.
Ours work well. I am going to look at the erroring codes in this next rev.
BP
|
|
|
Post by pagerman on Apr 25, 2021 3:44:24 GMT -8
I have ordered a new power supply. The AQI seems "stuck" again..... Attachments:
|
|
|
Post by SDL on Apr 25, 2021 13:16:51 GMT -8
Bizzarre. It will be interesting whether the power supply fixes it. I've attached the plot from our Solar Powered WeatherSense AQI system for comparison. BP
|
|
|
Post by Jason on Apr 25, 2021 15:07:12 GMT -8
Bizzarre. It will be interesting whether the power supply fixes it. I've attached the plot from our Solar Powered WeatherSense AQI system for comparison. BP View AttachmentAre the zeros in your data checksum errors? Jason
|
|
|
Post by SDL on Apr 25, 2021 15:14:13 GMT -8
Haven't looked into it yet. Since this is a solar powered one, it has a different driver than the Raspberry Pi one.
BP
|
|
|
Post by pagerman on Apr 29, 2021 16:35:48 GMT -8
Still having the AQI issues. I'm running stable-ish (fingers crossed), but here is the last several hours of data.... This is with the new power supply and the new SD card. Attachments:
|
|
|
Post by pagerman on Apr 29, 2021 16:41:23 GMT -8
When I booted just now the nohup.out file shows that there is no dust sensor. Could that be it?
./SkyWeather2.JSON File exists
########################################################## SkyWeather2 Weather Station Version 025 - SwitchDoc Labs
Program Started at:2021-04-29 19:34:07 ##########################################################
b'' ---------------------- BMP280: Present SkyCam: Present OLED: Not Present SunAirPlus/SunControl: Not Present SolarMAX: Not Present DustSensor: Not Present
UseBlynk: Disabled UseWSLIGHTNING: Enabled UseWSAQI: Disabled UseWSSKYCAM: Disabled UseMySQL: Enabled UseMQTT: Disabled Check WLAN: Not Present WeatherUnderground: Present UseWeatherStem: Present ---------------------- ----------------- Scheduled Jobs -----------------
###### Jobstore default: patTheDog (trigger: interval[0:00:20], next run at: 2021-04-29 19:34:32 CDT) readWiredSensors (trigger: interval[0:00:30], next run at: 2021-04-29 19:34:42 CDT) tick (trigger: interval[0:01:00], next run at: 2021-04-29 19:35:12 CDT) takeSkyPicture (trigger: interval[0:01:00], next run at: 2021-04-29 19:35:12 CDT) barometricTrend (trigger: interval[0:15:00], next run at: 2021-04-29 19:49:12 CDT) writeWeatherRecord (trigger: interval[0:15:00], next run at: 2021-04-29 19:49:12 CDT) writeITWeatherRecord (trigger: interval[0:15:00], next run at: 2021-04-29 19:49:12 CDT) rebootPi (trigger: cron[day='5-30/5', hour='0', minute='4'], next run at: 2021-04-30 00:04:00 CDT) ----------------- starting 433MHz scanning ###### Main Weather Sensors Found Indoor Weather Sensors Found Tick! The time is: 2021-04-29 19:35:12.326228 mySkyCameraText= SkyWeather2 V025 29-Apr-2021 19:35:15 Wind Speed: 1.6MPH Wind Gust: 2.2MPH Temp: 53.2 F ------->Sea Level 1013.9787 Tick! The time is: 2021-04-29 19:36:12.325221 mySkyCameraText= SkyWeather2 V025 29-Apr-2021 19:36:15 Wind Speed: 0.0MPH Wind Gust: 0.0MPH Temp: 53.0 F ------->Sea Level 1013.9809 Tick! The time is: 2021-04-29 19:37:12.325441 mySkyCameraText= SkyWeather2 V025 29-Apr-2021 19:37:15 Wind Speed: 1.1MPH Wind Gust: 1.6MPH Temp: 53.0 F ------->Sea Level 1013.9911999999999 Tick! The time is: 2021-04-29 19:38:12.325422 mySkyCameraText= SkyWeather2 V025 29-Apr-2021 19:38:15 Wind Speed: 1.6MPH Wind Gust: 2.2MPH Temp: 52.9 F ------->Sea Level 1014.0061000000001 Tick! The time is: 2021-04-29 19:39:12.325402
|
|
|
Post by pagerman on Apr 30, 2021 4:46:14 GMT -8
It did an automatic reboot last night. EVERYTHING WORKED!!! Lol. But, I still have no AQI readings. It's now stuck at zero.
|
|
|
Post by pagerman on May 1, 2021 5:38:34 GMT -8
Station crashed again (see other thread) and I had to do a power off/on. When I did the nohup.out now shows the dust sensor present.
./SkyWeather2.JSON File exists
########################################################## SkyWeather2 Weather Station Version 025 - SwitchDoc Labs
Program Started at:2021-05-01 07:20:49 ##########################################################
b'' ---------------------- BMP280: Present SkyCam: Present OLED: Not Present SunAirPlus/SunControl: Not Present SolarMAX: Not Present DustSensor: Present
UseBlynk: Disabled UseWSLIGHTNING: Enabled UseWSAQI: Disabled UseWSSKYCAM: Disabled UseMySQL: Enabled UseMQTT: Disabled Check WLAN: Not Present WeatherUnderground: Present UseWeatherStem: Present ---------------------- ----------------- Scheduled Jobs -----------------
###### Jobstore default: patTheDog (trigger: interval[0:00:20], next run at: 2021-05-01 07:21:14 CDT) readWiredSensors (trigger: interval[0:00:30], next run at: 2021-05-01 07:21:24 CDT) tick (trigger: interval[0:01:00], next run at: 2021-05-01 07:21:54 CDT) takeSkyPicture (trigger: interval[0:01:00], next run at: 2021-05-01 07:21:55 CDT) read_AQI (trigger: interval[0:12:00], next run at: 2021-05-01 07:32:55 CDT) barometricTrend (trigger: interval[0:15:00], next run at: 2021-05-01 07:35:55 CDT) writeWeatherRecord (trigger: interval[0:15:00], next run at: 2021-05-01 07:35:55 CDT) writeITWeatherRecord (trigger: interval[0:15:00], next run at: 2021-05-01 07:35:55 CDT) rebootPi (trigger: cron[day='5-30/5', hour='0', minute='4'], next run at: 2021-05-05 00:04:00 CDT) ----------------- starting 433MHz scanning ###### Main Weather Sensors Found Indoor Weather Sensors Found Tick! The time is: 2021-05-01 07:26:54.988784 mySkyCameraText= SkyWeather2 V025 01-May-2021 07:26:57 Wind Speed: 1.3MPH Wind Gust: 1.6MPH Temp: 48.0 F ------->Sea Level 1018.2115
And I have an AQI reading.
|
|