tecronin
Junior Member
Posts: 91
Raspberry Pi: Yes
|
Post by tecronin on May 15, 2021 19:59:17 GMT -8
I'm installing the pi and sky hat in one junction box then what to run conduit to an additional box to house the thunder board. I also will have the AQI installed
it recommends using the I2C 4 Channel Mux Extender board, is that needed if I connect to the sky hat? I've got 50cm cables to be able to distance it from the pi box.
|
|
|
|
Post by SDL on May 16, 2021 13:29:58 GMT -8
|
|
tecronin
Junior Member
Posts: 91
Raspberry Pi: Yes
|
Post by tecronin on May 17, 2021 17:44:19 GMT -8
there can only be the thunderboard hooked to the pi?
there's no way to isolate it with the mux board?
my wife gives me enough of a hard time with the weather station on the porch so trying to minimize the foot print.
|
|
|
|
Post by SDL on May 17, 2021 18:17:09 GMT -8
The issue is the Thunderboard likes to be alone on the bus. Move it to segment #1 and see if it works there. Run the Mux test to see what is on each segment. of course, the lightning board won't show up.  BP |
|
