|
Post by pagerman on Jun 21, 2021 17:38:10 GMT -8
Pagerman, I have no clue! We must just chalk this up to your amazing skills! BP My skills of doing nothing!!!! LOL. Let's see what happens when I move it outside. Also, I am NOT uploading to weatherSTEM, but I'd like to. But I'm afraid to LOL
|
|
|
Post by pagerman on Jun 21, 2021 17:48:06 GMT -8
Pagerman, I have no clue! We must just chalk this up to your amazing skills! BP It's been running since the 9th......
|
|
dow4hurst
Full Member
SkyWeather2 Newbie
Posts: 117
|
Post by dow4hurst on Jun 21, 2021 19:49:11 GMT -8
I had a long run of no problems so I didn't make any progress on my SkyWeather2 while watching weather data accumulate. My advice is go ahead and do what you have to when you have a day to work on it. It is fun watching it take data, but we won't know if the new SD card helps until you try it out. I'm not taking pictures and it won't die here either. 'Valkyrie said, "The stupid dog won't die!" (Ragnarok )' You'll have to configure SkyWeather2 but all the software is updated and works. (I tested it) No patches or updates should be applied yet. Let's see if getting your JSON file customized to your account with WU will act in a stable manner. Maybe over the long 4th of July weekend I can get mine outside. I have the outdoor AQI, and Lightning kits to put together. Plus, I want to get a fan installed in the SkyWeather2 before it actually goes outside. I've got everything I need to do that. We hit 92 F today, the first day of summer, so I know the SkyWeather2 will need a fan. Dow
|
|
|
Post by pagerman on Jun 28, 2021 5:15:31 GMT -8
Ok. Had it running since the 9th with it uploading to WU and no camera.
Restarted and had it uploading to WU and WS with the camera. Upload to WS failed at 10:52pm. WU was still receiving data. VNC would not connect, but SSH did connect.
I have now restarted with the camera connected and ONLY uploading to WU. No webcam as I have never been able to get that to work.
I have pretty much determined that this is an issue with WeatherSTEM. Not my network or anything else on my end.
|
|
|
Post by pagerman on Jun 28, 2021 5:16:14 GMT -8
I had a long run of no problems so I didn't make any progress on my SkyWeather2 while watching weather data accumulate. My advice is go ahead and do what you have to when you have a day to work on it. It is fun watching it take data, but we won't know if the new SD card helps until you try it out. I'm not taking pictures and it won't die here either. 'Valkyrie said, "The stupid dog won't die!" (Ragnarok )' You'll have to configure SkyWeather2 but all the software is updated and works. (I tested it) No patches or updates should be applied yet. Let's see if getting your JSON file customized to your account with WU will act in a stable manner. Maybe over the long 4th of July weekend I can get mine outside. I have the outdoor AQI, and Lightning kits to put together. Plus, I want to get a fan installed in the SkyWeather2 before it actually goes outside. I've got everything I need to do that. We hit 92 F today, the first day of summer, so I know the SkyWeather2 will need a fan. Dow See my response. I'm going to let it run again as is. If it dies again, I'll switch cards.
|
|
|
Post by SDL on Jun 28, 2021 9:26:01 GMT -8
WeatherSTEM and WU both use https transport. Did you ever capture a bad response from WeatherSTEM (when it hangs?).
We are working on a system that replaces most of the WeatherSTEM functionality (TimeLapse especially).
BP
|
|
rich
New Member
Posts: 27
|
Post by rich on Jun 28, 2021 11:51:16 GMT -8
I've just started my SkyWeather2 system and am having an issue with uploading data to the WeatherSTEM. I am uploading data to WU successfully and am getting the emails, so I know I am talking on the network. However I get the following information in the debug listing when uploading to the STEM site:
SkyCam Picture Taken -------------------- processing FT020T Data This is the raw data: {"time" : "2021-06-28 12:44:36", "model" : "SwitchDoc Labs FT020T AIO", "device" : 12, "id" : 0, "batterylow" : 0, "avewindspeed" : 0, "gustwindspeed" : 0, "winddirection" : 175, "cumulativerain" : 12, "temperature" : 1100, "humidity" : 58, "light" : 450, "uv" : 1, "mic" : "CRC"}
processing FT020T Data This is the raw data: {"time" : "2021-06-28 12:44:36", "model" : "SwitchDoc Labs FT020T AIO", "device" : 12, "id" : 0, "batterylow" : 0, "avewindspeed" : 0, "gustwindspeed" : 0, "winddirection" : 175, "cumulativerain" : 12, "temperature" : 1100, "humidity" : 58, "light" : 450, "uv" : 1, "mic" : "CRC"}
duplicate found mySkyCameraText= SkyWeather2 V026.2 28-Jun-2021 12:44:40 Wind Speed: 0.0MPH Wind Gust: 0.0MPH Temp: 70.0 F -------------------- SkyCam Package Sending -------------------- API Key: 97bca7bd83fb1fb14a667984e0a2bb2f ------->Sea Level 1024.2952 The pastebin URL is (r.text):{"error":"Unregistered SkyWeather Station"} processing FT020T Data
For some reason it thinks my system is not registered. I've double checked the keys to make sure they match on the website and in the SkyWeather configuration file. I've even deleted the device on the website and re-installed it. Still get the same message.
Does anyone have any thoughts or suggestions?
|
|
|
Post by pagerman on Jun 29, 2021 6:02:25 GMT -8
Died at 4:24AM.
At midnight I got the following 2 lines. Then at 4:17am it rebooted. I HAVE NOTHING ASKING FOR A REBOOT. This only seems to happen when the camera is connected to the Pi. After the reboot it did not start uploading again.
Jun 29 00:00:16 SwitchDocLabs rsyslogd: [origin software="rsyslogd" swVersion="8.1901.0" x-pid="343" x-info="https://www.rsyslog.com"] rsyslogd was HUPed Jun 29 00:00:21 SwitchDocLabs colord[464]: failed to get session [pid 4386]: No data available Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Booting Linux on physical CPU 0x0 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Linux version 5.10.17-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1403 SMP Mon Feb 22 11:33:35 GMT 2021 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] CPU: div instructions available: patching division code Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Memory policy: Data cache writealloc Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Zone ranges: Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Normal empty Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] HighMem [mem 0x0000000030000000-0x00000000fbffffff] Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Movable zone start for each node Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Early memory node ranges Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000037ffffff] Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] percpu: Embedded 20 pages/cpu s50700 r8192 d23028 u81920 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 997120 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1600x1200M@60 smsc95xx.macaddr=DC:A6:32:A7:24:20 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=698e33bd-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Kernel parameter elevator= does not have any effect anymore. Jun 29 04:17:05 SwitchDocLabs mtp-probe: checking bus 1, device 3: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1"
Here's the entire boot: Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Booting Linux on physical CPU 0x0 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Linux version 5.10.17-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1403 SMP Mon Feb 22 11:33:35 GMT 2021 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] CPU: div instructions available: patching division code Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Memory policy: Data cache writealloc Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Zone ranges: Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Normal empty Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] HighMem [mem 0x0000000030000000-0x00000000fbffffff] Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Movable zone start for each node Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Early memory node ranges Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000037ffffff] Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] percpu: Embedded 20 pages/cpu s50700 r8192 d23028 u81920 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 997120 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1600x1200M@60 smsc95xx.macaddr=DC:A6:32:A7:24:20 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=698e33bd-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Kernel parameter elevator= does not have any effect anymore. Jun 29 04:17:05 SwitchDocLabs mtp-probe: checking bus 1, device 3: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1" Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Please use sysfs to set IO scheduler for individual devices. Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] software IO TLB: mapped [mem 0x0000000017cc0000-0x000000001bcc0000] (64MB) Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Memory: 3602312K/3997696K available (10240K kernel code, 1358K rwdata, 3160K rodata, 2048K init, 890K bss, 133240K reserved, 262144K cma-reserved, 3211264K highmem) Jun 29 04:17:05 SwitchDocLabs mtp-probe: bus: 1, device: 3 was not an MTP device Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] ftrace: allocating 33942 entries in 67 pages Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] ftrace: allocated 67 pages with 3 groups Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] rcu: Hierarchical RCU implementation. Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Rude variant of Tasks RCU enabled. Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000000] random: get_random_bytes called from start_kernel+0x3c8/0x59c with crng_init=0 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000026] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000085] bcm2835: system timer (irq = 25) Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000733] arch_timer: cp15 timer(s) running at 54.00MHz (phys). Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000751] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000769] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.000784] Switching to timer-based delay loop, resolution 18ns Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.001033] Console: colour dummy device 80x30 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.001099] printk: console [tty1] enabled Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.001155] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.001186] pid_max: default: 32768 minimum: 301 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.001355] LSM: Security Framework initializing Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.001537] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.001562] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.003134] Disabling memory control group subsystem Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.003254] CPU: Testing write buffer coherency: ok Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.003704] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.004892] Setting up static identity map for 0x200000 - 0x20003c Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.005087] rcu: Hierarchical SRCU implementation. Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.005993] smp: Bringing up secondary CPUs ... Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.007172] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.008514] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.009778] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.009935] smp: Brought up 1 node, 4 CPUs Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.009956] SMP: Total of 4 processors activated (432.00 BogoMIPS). Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.009970] CPU: All CPU(s) started in HYP mode. Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.009984] CPU: Virtualization extensions available. Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.010806] devtmpfs: initialized Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.024875] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.025106] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.025137] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.032109] pinctrl core: initialized pinctrl subsystem Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.033164] NET: Registered protocol family 16 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.037001] DMA: preallocated 1024 KiB pool for atomic coherent allocations Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.037774] audit: initializing netlink subsys (disabled) Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.038048] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.038617] thermal_sys: Registered thermal governor 'step_wise' Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.039407] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.039424] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.039806] Serial: AMBA PL011 UART driver Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.072659] bcm2835-mbox fe00b880.mailbox: mailbox enabled Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.090849] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-02-25T12:11:39, variant start_x Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.100870] raspberrypi-firmware soc:firmware: Firmware hash is 564e5f9b852b23a330b1764bcf0b2d022a20afd0 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.145817] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.149925] vgaarb: loaded Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.150367] SCSI subsystem initialized Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.150592] usbcore: registered new interface driver usbfs Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.150664] usbcore: registered new interface driver hub Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.150736] usbcore: registered new device driver usb Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.151480] usb_phy_generic phy: supply vcc not found, using dummy regulator Jun 29 04:17:05 SwitchDocLabs kernel: [ 0.153460] clocksource: Switched to clocksource arch_sys_counter Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.152902] VFS: Disk quotas dquot_6.6.0 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.153008] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.153168] FS-Cache: Loaded Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.153357] CacheFiles: Loaded Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.154429] simple-framebuffer 3e474000.framebuffer: framebuffer at 0x3e474000, 0x753000 bytes, mapped to 0x(ptrval) Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.154450] simple-framebuffer 3e474000.framebuffer: format=a8r8g8b8, mode=1600x1200x32, linelength=6400 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.154915] Console: switching to colour frame buffer device 200x75 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.164229] simple-framebuffer 3e474000.framebuffer: fb0: simplefb registered! Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.174673] NET: Registered protocol family 2 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.175490] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.175533] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.175686] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.175754] TCP: Hash tables configured (established 8192 bind 8192) Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.175902] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.175936] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.176208] NET: Registered protocol family 1 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.176914] RPC: Registered named UNIX socket transport module. Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.176929] RPC: Registered udp transport module. Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.176944] RPC: Registered tcp transport module. Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.176959] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.176981] PCI: CLS 0 bytes, default 64 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.179994] Initialise system trusted keyrings Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.180221] workingset: timestamp_bits=14 max_order=20 bucket_order=6 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.188792] zbud: loaded Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.190670] FS-Cache: Netfs 'nfs' registered for caching Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.191432] NFS: Registering the id_resolver key type Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.191474] Key type id_resolver registered Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.191489] Key type id_legacy registered Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.191623] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.192655] Key type asymmetric registered Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.192671] Asymmetric key parser 'x509' registered Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.192863] bounce: pool size: 64 pages Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.192905] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.193115] io scheduler mq-deadline registered Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.193132] io scheduler kyber registered Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.197465] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.197497] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.197577] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.197666] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.255564] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.255954] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.255975] pci_bus 0000:00: root bus resource [bus 00-ff] Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.255997] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.256085] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.256325] pci 0000:00:00.0: PME# supported from D0 D3hot Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.259826] PCI: bus0: Fast back to back transfers disabled Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.260178] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.260304] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.260738] pci 0000:01:00.0: PME# supported from D0 D3cold Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.264249] PCI: bus1: Fast back to back transfers disabled Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.264311] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.264335] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.264418] pci 0000:00:00.0: PCI bridge to [bus 01] Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.264443] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.264847] pcieport 0000:00:00.0: enabling device (0140 -> 0142) Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.265057] pcieport 0000:00:00.0: PME: Signaling with IRQ 64 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.270797] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.271694] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.274185] iproc-rng200 fe104000.rng: hwrng registered Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.274491] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.275385] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.287351] brd: module loaded Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.299515] loop: module loaded Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.301139] Loading iSCSI transport class v2.0-870. Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.303611] libphy: Fixed MDIO Bus: probed Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.305322] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.323507] libphy: bcmgenet MII bus: probed Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.413611] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.414734] usbcore: registered new interface driver r8152 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.414819] usbcore: registered new interface driver lan78xx Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.414879] usbcore: registered new interface driver smsc95xx Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.416471] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142) Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.416631] xhci_hcd 0000:01:00.0: xHCI Host Controller Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.416666] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.419955] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000030000000890 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.421280] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.421299] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.421316] usb usb1: Product: xHCI Host Controller Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.421332] usb usb1: Manufacturer: Linux 5.10.17-v7l+ xhci-hcd Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.421348] usb usb1: SerialNumber: 0000:01:00.0 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.422092] hub 1-0:1.0: USB hub found Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.422191] hub 1-0:1.0: 1 port detected Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.422856] xhci_hcd 0000:01:00.0: xHCI Host Controller Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.422883] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.422909] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.423472] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.423491] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.423509] usb usb2: Product: xHCI Host Controller Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.423525] usb usb2: Manufacturer: Linux 5.10.17-v7l+ xhci-hcd Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.423541] usb usb2: SerialNumber: 0000:01:00.0 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.424244] hub 2-0:1.0: USB hub found Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.424322] hub 2-0:1.0: 4 ports detected Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.426055] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.426872] usbcore: registered new interface driver uas Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.426978] usbcore: registered new interface driver usb-storage Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.427173] mousedev: PS/2 mouse device common for all mice Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.428836] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.432309] sdhci: Secure Digital Host Controller Interface driver Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.432324] sdhci: Copyright(c) Pierre Ossman Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.432952] sdhci-pltfm: SDHCI platform and OF driver helper Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.436402] ledtrig-cpu: registered to indicate activity on CPUs Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.436689] hid: raw HID events driver (C) Jiri Kosina Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.436835] usbcore: registered new interface driver usbhid Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.436849] usbhid: USB HID core driver Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.442238] Initializing XFRM netlink socket Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.442281] NET: Registered protocol family 17 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.442385] Key type dns_resolver registered Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.442839] Registering SWP/SWPB emulation handler Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.443022] registered taskstats version 1 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.443064] Loading compiled-in X.509 certificates Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.443925] Key type ._fscrypt registered Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.443941] Key type .fscrypt registered Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.443956] Key type fscrypt-provisioning registered Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.455363] uart-pl011 fe201000.serial: there is not valid maps for state default Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.455666] uart-pl011 fe201000.serial: cts_event_workaround enabled Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.455739] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.462164] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.463009] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 37, base_baud = 62500000) is a 16550 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.464043] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.468510] of_cfs_init Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.468769] of_cfs_init: OK Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.502806] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.503476] Waiting for root device PARTUUID=698e33bd-02... Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.613540] mmc0: new ultra high speed DDR50 SDXC card at address 0001 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.614414] mmcblk0: mmc0:0001 SD 58.2 GiB Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.616421] mmcblk0: p1 p2 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.630858] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.630876] EXT4-fs (mmcblk0p2): write access will be enabled during recovery Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.741683] random: fast init done Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.783544] usb 1-1: new high-speed USB device number 2 using xhci_hcd Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.966175] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.966195] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.966213] usb 1-1: Product: USB2.0 Hub Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.968093] hub 1-1:1.0: USB hub found Jun 29 04:17:05 SwitchDocLabs kernel: [ 1.968419] hub 1-1:1.0: 4 ports detected Jun 29 04:17:05 SwitchDocLabs kernel: [ 2.293527] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd Jun 29 04:17:05 SwitchDocLabs kernel: [ 2.412265] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs Jun 29 04:17:05 SwitchDocLabs kernel: [ 2.417467] EXT4-fs (mmcblk0p2): 5 orphan inodes deleted Jun 29 04:17:05 SwitchDocLabs kernel: [ 2.417484] EXT4-fs (mmcblk0p2): recovery complete Jun 29 04:17:05 SwitchDocLabs kernel: [ 2.435779] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=2838, bcdDevice= 1.00 Jun 29 04:17:05 SwitchDocLabs kernel: [ 2.435800] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 29 04:17:05 SwitchDocLabs kernel: [ 2.435817] usb 1-1.1: Product: RTL2838UHIDIR Jun 29 04:17:05 SwitchDocLabs kernel: [ 2.435834] usb 1-1.1: Manufacturer: Realtek Jun 29 04:17:05 SwitchDocLabs kernel: [ 2.435851] usb 1-1.1: SerialNumber: 00000001 Jun 29 04:17:05 SwitchDocLabs kernel: [ 2.438021] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) Jun 29 04:17:05 SwitchDocLabs kernel: [ 2.438099] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. Jun 29 04:17:05 SwitchDocLabs kernel: [ 2.439222] devtmpfs: mounted Jun 29 04:17:05 SwitchDocLabs kernel: [ 2.448131] Freeing unused kernel memory: 2048K Jun 29 04:17:05 SwitchDocLabs kernel: [ 2.473798] Run /sbin/init as init process Jun 29 04:17:05 SwitchDocLabs kernel: [ 3.246777] NET: Registered protocol family 10 Jun 29 04:17:05 SwitchDocLabs kernel: [ 3.248163] Segment Routing with IPv6 Jun 29 04:17:05 SwitchDocLabs kernel: [ 4.329311] random: systemd: uninitialized urandom read (16 bytes read) Jun 29 04:17:05 SwitchDocLabs kernel: [ 4.340623] random: systemd: uninitialized urandom read (16 bytes read) Jun 29 04:17:05 SwitchDocLabs kernel: [ 4.341471] random: systemd: uninitialized urandom read (16 bytes read) Jun 29 04:17:05 SwitchDocLabs kernel: [ 4.490101] i2c /dev entries driver Jun 29 04:17:05 SwitchDocLabs kernel: [ 4.994053] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Jun 29 04:17:05 SwitchDocLabs kernel: [ 5.792694] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 Jun 29 04:17:05 SwitchDocLabs kernel: [ 5.793255] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 Jun 29 04:17:05 SwitchDocLabs kernel: [ 5.798181] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 Jun 29 04:17:05 SwitchDocLabs kernel: [ 5.798716] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 Jun 29 04:17:05 SwitchDocLabs kernel: [ 5.871186] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. Jun 29 04:17:05 SwitchDocLabs kernel: [ 5.880770] bcm2835_vc_sm_cma_probe: Videocore shared memory driver Jun 29 04:17:05 SwitchDocLabs kernel: [ 5.880796] [vc_sm_connected_init]: start Jun 29 04:17:05 SwitchDocLabs kernel: [ 5.889798] [vc_sm_connected_init]: installed successfully Jun 29 04:17:05 SwitchDocLabs kernel: [ 5.902726] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. Jun 29 04:17:05 SwitchDocLabs kernel: [ 5.914500] mc: Linux media interface: v0.10 Jun 29 04:17:05 SwitchDocLabs kernel: [ 5.947644] videodev: Linux video capture interface: v2.00 Jun 29 04:17:05 SwitchDocLabs kernel: [ 5.962155] bcm2835_audio bcm2835_audio: card created with 4 channels Jun 29 04:17:05 SwitchDocLabs kernel: [ 5.964997] bcm2835_audio bcm2835_audio: card created with 4 channels Jun 29 04:17:05 SwitchDocLabs kernel: [ 5.999939] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.001660] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.007916] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.009102] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.031911] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.277873] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.277922] fb0: switching to vc4drmfb from simple Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.278936] Console: switching to colour dummy device 80x30 Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.284090] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.285937] vc4-drm gpu: [drm] HDMI-A-1: EDID is invalid: Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.285987] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.286003] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.286018] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.286033] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.286048] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.286063] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.286078] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.286093] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.308588] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.429140] Console: switching to colour frame buffer device 200x75 Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.455094] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.636042] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.636518] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.636906] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.636951] bcm2835-codec bcm2835-codec: Loaded V4L2 decode Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.637492] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.637912] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.637952] bcm2835-isp bcm2835-isp: Register output node 0 with media controller Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.637976] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.637999] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.638022] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.638233] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.644307] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.644370] bcm2835-codec bcm2835-codec: Loaded V4L2 encode Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.649325] bcm2835-v4l2-0: V4L2 device registered as video0 - stills mode > 1280x720 Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.654395] bcm2835-v4l2-0: Broadcom 2835 MMAL video capture ver 0.0.2 loaded. Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.658486] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 Jun 29 04:17:05 SwitchDocLabs kernel: [ 6.658543] bcm2835-codec bcm2835-codec: Loaded V4L2 isp Jun 29 04:17:05 SwitchDocLabs kernel: [ 8.922908] random: crng init done Jun 29 04:17:05 SwitchDocLabs kernel: [ 8.922930] random: 7 urandom warning(s) missed due to ratelimiting Jun 29 04:17:05 SwitchDocLabs kernel: [ 8.943257] uart-pl011 fe201000.serial: no DMA platform data Jun 29 04:17:05 SwitchDocLabs udisksd[350]: udisks daemon version 2.8.1 starting Jun 29 04:17:05 SwitchDocLabs rsyslogd: imuxsock: Acquired UNIX socket '/run/systemd/journal/syslog' (fd 3) from systemd. [v8.1901.0] Jun 29 04:17:05 SwitchDocLabs rsyslogd: [origin software="rsyslogd" swVersion="8.1901.0" x-pid="357" x-info="https://www.rsyslog.com"] start Jun 29 04:17:05 SwitchDocLabs kernel: [ 9.282663] 8021q: 802.1Q VLAN Support v1.8 Jun 29 04:17:05 SwitchDocLabs kernel: [ 9.412114] cfg80211: Loading compiled-in X.509 certificates for regulatory database Jun 29 04:17:05 SwitchDocLabs kernel: [ 9.479750] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' Jun 29 04:17:05 SwitchDocLabs udisksd[350]: failed to load module crypto: libbd_crypto.so.2: cannot open shared object file: No such file or directory Jun 29 04:17:05 SwitchDocLabs udisksd[350]: failed to load module mdraid: libbd_mdraid.so.2: cannot open shared object file: No such file or directory Jun 29 04:17:06 SwitchDocLabs kernel: [ 9.563750] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS Jun 29 04:17:06 SwitchDocLabs kernel: [ 9.680386] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) Jun 29 04:17:06 SwitchDocLabs kernel: [ 9.680677] bcmgenet fd580000.ethernet eth0: Link is Down Jun 29 04:17:06 SwitchDocLabs udisksd[350]: Failed to load the 'mdraid' libblockdev plugin Jun 29 04:17:06 SwitchDocLabs udisksd[350]: Failed to load the 'crypto' libblockdev plugin Jun 29 04:17:06 SwitchDocLabs lightdm[501]: Error getting user list from org.freedesktop.Accounts: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Accounts was not provided by any .service files Jun 29 04:17:06 SwitchDocLabs udisksd[350]: Acquired the name org.freedesktop.UDisks2 on the system message bus Jun 29 04:17:07 SwitchDocLabs colord[552]: failed to get edid data: EDID length is too small Jun 29 04:17:07 SwitchDocLabs vncserver-x11[517,root]: ServerManager: Server started Jun 29 04:17:07 SwitchDocLabs colord[552]: failed to get session [pid 374]: No data available Jun 29 04:17:07 SwitchDocLabs vncserver-x11[517,root]: ConsoleDisplay: Cannot find a running X server on vt1 Jun 29 04:17:07 SwitchDocLabs vncserver-x11[517,root]: ConsoleDisplay: Found running X server (pid=565, binary=/usr/lib/xorg/Xorg) Jun 29 04:17:10 SwitchDocLabs kernel: [ 13.592027] broken atomic modeset userspace detected, disabling atomic Jun 29 04:17:10 SwitchDocLabs kernel: [ 13.843837] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx Jun 29 04:17:10 SwitchDocLabs kernel: [ 13.843885] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 29 04:17:11 SwitchDocLabs lightdm[674]: Error getting user list from org.freedesktop.Accounts: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Accounts was not provided by any .service files Jun 29 04:17:12 SwitchDocLabs kernel: [ 15.744506] Bluetooth: Core ver 2.22 Jun 29 04:17:12 SwitchDocLabs kernel: [ 15.744569] NET: Registered protocol family 31 Jun 29 04:17:12 SwitchDocLabs kernel: [ 15.744576] Bluetooth: HCI device and connection manager initialized Jun 29 04:17:12 SwitchDocLabs kernel: [ 15.744899] Bluetooth: HCI socket layer initialized Jun 29 04:17:12 SwitchDocLabs kernel: [ 15.744909] Bluetooth: L2CAP socket layer initialized Jun 29 04:17:12 SwitchDocLabs kernel: [ 15.744925] Bluetooth: SCO socket layer initialized Jun 29 04:17:12 SwitchDocLabs kernel: [ 15.755649] Bluetooth: HCI UART driver ver 2.3 Jun 29 04:17:12 SwitchDocLabs kernel: [ 15.755662] Bluetooth: HCI UART protocol H4 registered Jun 29 04:17:12 SwitchDocLabs kernel: [ 15.755729] Bluetooth: HCI UART protocol Three-wire (H5) registered Jun 29 04:17:12 SwitchDocLabs kernel: [ 15.755883] Bluetooth: HCI UART protocol Broadcom registered Jun 29 04:17:12 SwitchDocLabs kernel: [ 16.220600] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Jun 29 04:17:12 SwitchDocLabs kernel: [ 16.220609] Bluetooth: BNEP filters: protocol multicast Jun 29 04:17:12 SwitchDocLabs kernel: [ 16.220627] Bluetooth: BNEP socket layer initialized Jun 29 04:17:12 SwitchDocLabs kernel: [ 16.266233] Bluetooth: RFCOMM TTY layer initialized Jun 29 04:17:12 SwitchDocLabs kernel: [ 16.266258] Bluetooth: RFCOMM socket layer initialized Jun 29 04:17:12 SwitchDocLabs kernel: [ 16.266276] Bluetooth: RFCOMM ver 1.11 Jun 29 04:17:13 SwitchDocLabs kernel: [ 16.527202] fuse: init (API version 7.32) Jun 29 04:17:21 SwitchDocLabs colord[552]: failed to get session [pid 374]: No data available
It failed right there ^^^^^^^^^
|
|
|
Post by pagerman on Jun 30, 2021 4:13:31 GMT -8
Still running this morning.
|
|
|
Post by SDL on Jun 30, 2021 15:00:51 GMT -8
Dow, any ideas on this?
BP
|
|
|
Post by pagerman on Jul 1, 2021 5:35:35 GMT -8
And still running this morning.
|
|
dow4hurst
Full Member
SkyWeather2 Newbie
Posts: 117
|
Post by dow4hurst on Jul 1, 2021 21:32:33 GMT -8
And still running this morning. The logs look absolutely normal. Look at them enough and they get familiar. I don't have any ideas to try at the moment. Dow
|
|
|
Post by pagerman on Jul 2, 2021 5:36:28 GMT -8
And still running fine.
|
|
|
Post by rscalberlah on Jul 5, 2021 21:20:09 GMT -8
Had same issue here. Ordered a pre-install SD, all is working fine. But nearly after 24h Dash App don't update the photo and so skyweather is not updated. Data from weatherack runs true, like i can see at wunderground. So its not the dash app shotting down. Its something different. For me its an issue between camera and dash app. And it happens always nearly after 24h, so it must be an software issue. At the moment i can't say what.
|
|
|
Post by SDL on Jul 7, 2021 9:53:18 GMT -8
That's interesting. You are running the SkyWeather Dash App or the WeatherSense Dash App?
BP
|
|