My R820T2 Dongle Died?

I got mine with the KS Campaign and just got around to installing everything about a month ago. Yesterday I noticed that I wasn't getting any readings and it looks like the dongle may have de



[email protected]:~/SDL_Pi_WeatherRack2 $ lsusb

Bus 001 Device 004: ID 0424:7800 Standard Microsystems Corp.

Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub

Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

[email protected]:~/SDL_Pi_WeatherRack2 $ dmesg | grep error

[2586529.878863] usb 1-1.1.2: device descriptor read/64, error -32

[2586530.098871] usb 1-1.1.2: device descriptor read/64, error -32

[2586530.418873] usb 1-1.1.2: device descriptor read/64, error -32

[2586530.638876] usb 1-1.1.2: device descriptor read/64, error -32

[2586531.858891] usb 1-1.1.2: device not accepting address 8, error -32

[2586532.398877] usb 1-1.1.2: device not accepting address 9, error -32

[email protected]:~/SDL_Pi_WeatherRack2 $ dmesg|tail

[2586530.098871] usb 1-1.1.2: device descriptor read/64, error -32

[2586530.318884] usb 1-1.1.2: new low-speed USB device number 7 using dwc_otg

[2586530.418873] usb 1-1.1.2: device descriptor read/64, error -32

[2586530.638876] usb 1-1.1.2: device descriptor read/64, error -32

[2586530.759022] usb 1-1.1-port2: attempt power cycle

[2586531.418877] usb 1-1.1.2: new low-speed USB device number 8 using dwc_otg

[2586531.858891] usb 1-1.1.2: device not accepting address 8, error -32

[2586531.958892] usb 1-1.1.2: new low-speed USB device number 9 using dwc_otg

[2586532.398877] usb 1-1.1.2: device not accepting address 9, error -32

[2586532.399025] usb 1-1.1-port2: unable to enumerate USB device
I had also tested it on a Windows computer and had it running there but both the Pi and the Windows box cannot enumerate the dongle so I'm 99% sure that it died for some reason.

What can I do at this point?