teech
New Member
Posts: 19
Raspberry Pi: Yes
|
Post by teech on Jun 29, 2021 0:20:09 GMT -8
Dear All,
After a reflash of SD card the SkyWeather2 is now functioning well. I have two stubborn issues that I suspect will be easy to remedy with redirects to legacy posts, if you would be so kind.
1. Dash_App is up and logging most data, but not AQI. On the Status Page the SW air quality is greyed out, but the data is showing on Weatherstem and testDust works fine. Pi CPU lights are all green.
2. Timelapse. This may actually be functionig fine, but I can't find it....
Many thanks in advance.
|
|
|
Post by SDL on Jun 30, 2021 14:56:24 GMT -8
1) dash_app is only recording the AQI from WeatherSense Wireless AQI, not the wired unit.
2) There is no time-lapse in the WeatherSTEM system. They removed it. We just about have it working for WeatherSense and will be porting it to SKyWeather2.
BP
|
|
teech
New Member
Posts: 19
Raspberry Pi: Yes
|
Post by teech on Jul 2, 2021 6:19:32 GMT -8
1) dash_app is only recording the AQI from WeatherSense Wireless AQI, not the wired unit. 2) There is no time-lapse in the WeatherSTEM system. They removed it. We just about have it working for WeatherSense and will be porting it to SKyWeather2. BP Thank you. If I were to buy an AQI unit, can I use my existing RPi set up to connect it to the same dash feed? Secondly, could you please let me know where the photos taken on my existing unit are stored, and for how long? Are they simply stored locally on the Pi? Best wishes.
|
|
|
Post by SDL on Jul 7, 2021 10:06:18 GMT -8
1) Yes, the AQI wireless unit will work with the Dash Feed.
2) No photos are stored currently on the Pi. Only the current one is stored in the cloud. All the pictures in the next version will be stored under the static directory in the SkyWeather2 directory.
BP
|
|