|
Post by kh6jag on Jul 21, 2021 5:01:37 GMT -8
Is it possible to use 2 cameras with either Skyweather or Skyweather2?
We intend to use the weather station at an observatory location and have one camera pointed at the horizon and the other camera as an AllSky camera with an overhead view. Both cameras have a wireless link capability.
|
|
|
Post by SDL on Jul 21, 2021 7:04:06 GMT -8
We will be supporting our Wireless Solar SkyCam as a second (and third and fourth.....) camera in SkyWeather2. You should be able to add your AllSky camera by modifying the software.
BP
|
|
|
Post by kh6jag on Jul 22, 2021 3:58:10 GMT -8
Thanks - will the interface be through a IP where I can access any wireless camera? For real-time viewing of telescope operation I use RPi CAM WEB Interface and a battery powered RPiHQ cam to provide a digital eyepiece for the telescope.. I've found this utility to be a useful tool to use to support most remote viewing options. I'm currently experimenting with the scheduling options to provide an all-night camera view using the camera IP for the overhead view and then changing to the horizon camera IP for the daytime view. If not already available in the new cam SW could there be switch to rotate through cameras or select multiple views or a programmed sequence?
|
|
|
Post by SDL on Jul 22, 2021 7:38:39 GMT -8
No general interface, it's a custom interface designed for Solar SkyCams and the local Pi Camera. Open source, so you can modify it to support other cameras.
BP
|
|