0_0
Full Member
Posts: 114
Raspberry Pi: Yes
Other Device: PC, Arduino, ESP32
|
Post by 0_0 on Sept 13, 2021 15:22:56 GMT -8
Hello, I have the WeatherRack2, and using an RPi 4, I am able to get the raw data feed from the unit to stream. I have been able to save console output using tee to a txt file locally. I am not able to get the dashboard to install though. rtl_433 is installed and I have run "git pull" on it. I am trying to install WeatherSense to the RPI (https://github.com/switchdoclabs/SDL_Pi_WeatherSense) and am stuck on running:
pi@computer:~/SDL_Pi_WeatherSenseWireless $ sudo python3 WeatherSenseMonitor.py Traceback (most recent call last): File "WeatherSenseMonitor.py", line 6, in <module> import wirelessSensors File "/home/pi/SDL_Pi_WeatherSenseWireless/wirelessSensors.py", line 18, in <module> import util File "/home/pi/SDL_Pi_WeatherSenseWireless/util.py", line 4, in <module> from past.utils import old_div ModuleNotFoundError: No module named 'past'
Any help would be greatly appreciated. Thank you
|
|
|
Post by SDL on Sept 13, 2021 15:27:28 GMT -8
Sounds like you don't have the past.utils installed. This has to do with a translation we did from Python2 to Python3.
Do this:
sudo pip3 install future
That should fix that.
BP
|
|
0_0
Full Member
Posts: 114
Raspberry Pi: Yes
Other Device: PC, Arduino, ESP32
|
Post by 0_0 on Sept 13, 2021 16:46:42 GMT -8
Nice. Thank you. It took a few more of those to get it to work, but I am there now. I am to the point that I have a webGUI, but no data loading to it. I see that there are forum posts for that issue, so I will chase it down further. Thank you very much again indeed.
|
|