Post by Specious on Oct 16, 2021 0:32:32 GMT -8
Hello,
I am trying to set up SkyWeather2 for the first time, and I think that I have followed all of the instructions correctly.
When I run "Sudo python SkyWeather2.py" (under ~/SDL_Pi_SkyWeather2), it seems to work, but when I run "sudo python3 index.py" (under ~/SDL_Pi_SkyWeather2/dash_app), I get:
The dash_core_components package is deprecated. Please replace
`import dash_core_components as dcc` with `from dash import dcc`
import dash_core_components as dcc
index.py:6: UserWarning:
The dash_html_components package is deprecated. Please replace
`import dash_html_components as html` with `from dash import html`
import dash_html_components as html
Traceback (most recent call last):
File "index.py", line 9, in <module>
import plotly.express as px
File "/usr/local/lib/python3.7/dist-packages/plotly/express/__init__.py", line 12, in <module>
Plotly express requires pandas to be installed."""
ImportError: Plotly express requires pandas to be installed.
I am running Raspbian Buster (10) 32-bit and have completely restarted from OS reload several times. I am always stuck at the same spot.
##########################################################
SkyWeather2 Weather Station Version 027.1 - SwitchDoc Labs
Program Started at:2021-10-16 01:23:41
##########################################################
b''
b''
----------------------
BMP280: Present
SkyCam: Present
OLED: Not Present
SunAirPlus/SunControl: Not Present
SolarMAX: Not Present
DustSensor: Not Present
UseBlynk: Disabled
UseWSLIGHTNING: Disabled
UseWSAQI: Enabled
UseWSSKYCAM: Disabled
UseMySQL: Enabled
UseMQTT: Disabled
Check WLAN: Present
WeatherUnderground: Not Present
UseWeatherStem: Not Present
----------------------
-----------------
Scheduled Jobs
-----------------
######
Jobstore default:
patTheDog (trigger: interval[0:00:20], next run at: 2021-10-16 01:24:11 PDT)
readWiredSensors (trigger: interval[0:00:30], next run at: 2021-10-16 01:24:21 PDT)
tick (trigger: interval[0:01:00], next run at: 2021-10-16 01:24:51 PDT)
takeSkyPicture (trigger: interval[0:01:00], next run at: 2021-10-16 01:24:51 PDT)
barometricTrend (trigger: interval[0:15:00], next run at: 2021-10-16 01:38:51 PDT)
writeWeatherRecord (trigger: interval[0:15:00], next run at: 2021-10-16 01:38:51 PDT)
writeITWeatherRecord (trigger: interval[0:15:00], next run at: 2021-10-16 01:38:51 PDT)
WSread_AQI (trigger: interval[0:20:00], next run at: 2021-10-16 01:43:51 PDT)
cleanPictures (trigger: cron[day='*', hour='3', minute='4'], next run at: 2021-10-16 03:04:00 PDT)
cleanTimeLapses (trigger: cron[day='*', hour='3', minute='10'], next run at: 2021-10-16 03:10:00 PDT)
buildTimeLapse (trigger: cron[day='*', hour='5', minute='30'], next run at: 2021-10-16 05:30:00 PDT)
rebootPi (trigger: cron[day='5-30/5', hour='0', minute='4'], next run at: 2021-10-20 00:04:00 PDT)
-----------------
starting 433MHz scanning
######
Main Weather Sensors Found
Indoor Weather Sensors Found
Tick! The time is: 2021-10-16 01:24:51.782866
mySkyCameraText= SkyWeather2 V027.1 16-Oct-2021 01:24:54 Wind Speed: 0.0MPH Wind Gust: 0.0MPH Temp: 71.1 F
query= INSERT INTO SkyCamPictures (cameraID, picturename, picturesize, messageID, resends,resolution) VALUES('SkyCamPi', 'SkyCamPi_1_2021-10-16-01-24-54.jpg', 86831, 1, 0, 0 )
I have the Seismograph, the AQI sensor and the SkyCam. I have a different camera plugged in to the ribbon cable as well, and have run through Raspi-config to enable all interfaces for the time being. They are currently turned off, so it is not a problem (yet) that they are not showing up in the above.
I have un/reinstalled pandas using both apt and pip3, and using "sudo" in every case. I cannot get any different response no matter the combination.
Any help would be greatly appreciate.
Thank you,
S
Any help would be greatly appreciated.