Post by Derek S on Feb 13, 2022 10:57:55 GMT -8
Hi there,
After assembling and testing everything, I was able to configure my SGS 2 to read the measurements of the sensors locally. Then I moved everything over to the 3D printed housing and when I powered everything back up, the Smart Garden text appears on the OLED but does not attempt to connect to the internet. I had already configured and had everything working.
I tried to do the factory reset by holding the Aux button through power up but nothing changed. Only the logo appears on the OLED.
The Pixel RGBW light is also not lighting up, only the blue power light.
How can I determine what is wrong here?
Thanks,
Derek
After assembling and testing everything, I was able to configure my SGS 2 to read the measurements of the sensors locally. Then I moved everything over to the 3D printed housing and when I powered everything back up, the Smart Garden text appears on the OLED but does not attempt to connect to the internet. I had already configured and had everything working.
I tried to do the factory reset by holding the Aux button through power up but nothing changed. Only the logo appears on the OLED.
The Pixel RGBW light is also not lighting up, only the blue power light.
How can I determine what is wrong here?
Thanks,
Derek
