2 of 3 Back Online - All butThunder

1⸮W⸮-⸮51⸮a⸮`⸮qt⸮⸮1(5310⸮d⸮1⸮(42⸮044(4⸮⸮$⸮⸮9 2 (⸮⸮⸮5 ⸮9⸮⸮ ⸮0⸮d ⸮⸮׃ӱ1(8⸮q!⸮䤸⸮85 ⸮3r1⸮0⸮80 ( ⸮$⸮⸮⸮⸮⸮⸮t⸮⸮ x⸮q⸮⸮⸮518⸮q!⸮⸮01p0⸮t44(4⸮⸮$⸮⸮9 0 ⸮⸮ ⸮ ⸮0⸮⸮ 0

Not sure what it means.
W

Watchdog1 Reset - Patted the Dog
11:56:07.884 ->
11:56:07.884 ->
11:56:07.884 -> >>>>>>>>>><<<<<<<<<
11:56:07.884 -> WeatherSense ThunderBoard
11:56:07.884 -> >>>>>>>>>><<<<<<<<<
11:56:07.884 -> Software Version:1
11:56:07.884 -> Unit ID:2
11:56:07.884 -> max message length=60
11:56:07.884 -> chipNoiseFloor=2
11:56:07.884 -> Noise floor is: 3
11:56:07.884 -> Spike rejection is: 2
11:56:07.884 -> Watchdog threshold is: 2
11:56:07.884 -> AS3935 Present
11:56:11.868 -> Manuf ID: 0x5449
11:56:11.868 -> wakeState=4
11:56:11.962 -> >>>>>>>>>><<<<<<<<<
11:56:11.962 -> IRQ Triggered=4
11:56:11.962 -> Disturber detected
11:56:11.962 -> >>>>>>>>>><<<<<<<<<
11:56:11.962 -> ###############
11:56:11.962 -> MessageCount=0
11:56:11.962 -> STATUS - WeatherSenseProtocol:16
11:56:11.962 -> WakeState=0
11:56:11.962 -> wakeCount=0
11:56:11.962 -> Current Interrupt Source: 0x4
11:56:11.962 -> Last Interrupt Source: 0x0
11:56:11.962 -> Last Interrupt Meaning: Disturber detected
11:56:11.962 -> Lightning Last Distance: 0
11:56:11.962 -> Interrupt Count: 1
11:56:11.962 -> Lightning Count:0
11:56:11.962 -> Lightning Timestamp:0
11:56:11.962 -> Battery Voltage: 4.19 V
11:56:11.962 -> Battery Current: -323.60 mA
11:56:11.962 -> Solar Panel Voltage: 4.78 V
11:56:11.962 -> Solar Current: 1.20 mA
11:56:11.962 -> Load Voltage: 4.99 V
11:56:11.962 -> Load Current: 27.90 mA
11:56:11.962 -> Currentmillis() = 4268
11:56:11.962 -> AuxA State:3 3
11:56:11.962 -> ###############
11:56:11.962 -> ----------Sending packets----------
11:56:11.962 -> ----------After Sending packet----------
11:56:11.962 -> 00 00 00 00 02 10 01 04 00 00 00 00 00 00 00 01 00 00 00 77 BE 9F 40 DE 24 86 40 CD CC A1 C3 34 33 DF 41 88 16 99 40 99 99 99 3F 13
11:56:12.243 -> ----------After Wait Sending packet----------
11:56:12.478 -> freeMemory()=651
11:56:12.478 -> bufferlength=44
11:56:17.428 -> ----------Packet Sent. Sleeping Now----------
11:56:17.662 -> Watchdog1 Reset - Patted the Dog
11:56:17.662 -> timeBeforeSleep=10007
11:56:53.751 -> Awake now: timeAfterSleep=40210
11:56:53.751 -> SleepTime = 30203
11:56:53.751 -> Millis Time: 40.21
11:56:53.751 -> 2wakeState=2
11:56:54.033 -> Watchdog1 Reset - Patted the Dog
11:56:54.033 -> wakeState=2
11:56:54.033 -> >>>>>>>>>><<<<<<<<<
11:56:54.033 -> IRQ Triggered=4
11:56:54.033 -> Disturber detected
11:56:54.033 -> >>>>>>>>>><<<<<<<<<
11:56:54.033 -> ###############
11:56:54.033 -> MessageCount=1
11:56:54.033 -> STATUS - WeatherSenseProtocol:16
11:56:54.033 -> WakeState=0
11:56:54.033 -> wakeCount=1
11:56:54.033 -> Current Interrupt Source: 0x4
11:56:54.033 -> Last Interrupt Source: 0x4
11:56:54.033 -> Last Interrupt Meaning: Disturber detected
11:56:54.033 -> Lightning Last Distance: 0
11:56:54.033 -> Interrupt Count: 2
11:56:54.033 -> Lightning Count:0
11:56:54.033 -> Lightning Timestamp:0
11:56:54.033 -> Battery Voltage: 4.19 V
11:56:54.033 -> Battery Current: -319.60 mA
11:56:54.033 -> Solar Panel Voltage: 4.79 V
11:56:54.033 -> Solar Current: 1.20 mA
11:56:54.033 -> Load Voltage: 4.99 V
11:56:54.033 -> Load Current: 28.50 mA
11:56:54.033 -> Currentmillis() = 40463
11:56:54.033 -> AuxA State:3 3
11:56:54.033 -> ###############
11:56:54.033 -> ----------Sending packets----------
11:56:54.033 -> ----------After Sending packet----------
11:56:54.033 -> 01 00 00 00 02 10 01 04 04 00 00 00 00 00 00 02 00 00 00 77 BE 9F 40 DE 24 86 40 CC CC 9F C3 00 00 E4 41 11 58 99 40 99 99 99 3F 13
11:56:54.314 -> ----------After Wait Sending packet----------
11:56:54.548 -> freeMemory()=651
11:56:54.548 -> bufferlength=44
11:56:59.508 -> ----------Packet Sent. Sleeping Now----------
11:56:59.743 -> Watchdog1 Reset - Patted the Dog
11:56:59.743 -> timeBeforeSleep=46202

Works with the internal antenna. Switched the board from the AQI to Thunder and it worked. Swapped back. Guess somehow the board I sent back didn't get swapped. Can you send me one that works? Frustrated. Also can I get a replacement 3D Print of the Connector for the Solar Wing in all this I snapped it off. 
Thanks
Wallace

 Thanks W

BP
Any luck with the transmitter board? I asked elsewhere what glue you used to glue 3D parts. I'll get a picture. It is the threaded part that joins to connector to box to the solar wing. If you tell me what glue I'll give it a shot. Or try to print my own.

Playing with Arduino IDE again.

W

BP,
You are the best. Replacement transmitter board worked like a charm. Charging things up and it all goes back out. Maybe I have until late fall before I have to deal with the dark days of no charging again by then maybe a plan or Ard. IDE coding.

Thanks
Wallace