|
Post by swanie on Aug 30, 2022 14:24:48 GMT -8
I recently replaced my v1 board with a v2. I configured the board for my network. It connects. Shows data - at least once or twice - then - fails to continue periodically sending data.
The display on the board is fine - shows temp, humidity, wind, direction, etc. - but when open the connection across the network I get an old raw string of weather data. The OurWeather page shows it's reading the data - but doesn't read. The IP address is correct. My router shows the espressif board is connected.
Thoughts ?
|
|
|
Post by SDL on Aug 30, 2022 15:04:36 GMT -8
What does this mean " but when open the connection across the network I get an old raw string of weather data."? Give me details.
Do you have the latest version of software installed?
BP
|
|
|
Post by swanie on Aug 31, 2022 12:42:53 GMT -8
I have the latest version. The string I get across the network is old - like when the unit first booted - in other words, it's not updating the raw data, nor can I read updated data (presumably because it's not updating ?). Yet - the OLED shows updated information during this time.
|
|
|
Post by SDL on Sept 5, 2022 14:52:43 GMT -8
Tell me what version you have installed. Post the "old raw string of data" too please.
Also, try a different browser.
BP
|
|