|
Post by gimli4284 on Nov 29, 2022 9:10:48 GMT -8
Good Day All!
(First, I am sorry if this is a duplicate post, I was unable to find the answer. Second, for this I am fairly newbyish, meaning when asking me to run, say, a log script please help me understand how to get there.)
I am successfully running the WeatherRack on a Raspberry Pi (3B I think, maybe a plus) and absolutely loving it! I am receiving readings from the F020TH AIO and the F016TH sensors, but only the info for the AIO sensor is displaying/changing on the dashboard; the indoor temp and humidity are not. But, when I got to the "Indoor T/H" tab the graphs are showing updated info. And the info on the sensor's screen matches what's on the graph. I am not sure where to start, so I thought of you all. Can you help me solve this? Thank you!
Attachments:
|
|
|
Post by SDL on Dec 1, 2022 16:09:00 GMT -8
What software are you running and what version is it? Look in the README.md
BP
|
|
|
Post by gimli4284 on Dec 3, 2022 7:49:37 GMT -8
I believe it's SwitchDoc Labs WeatherSense Open Source Protocol Monitor, version V016. (Screenshot attached). To launch the system I run the following: cd cd SDL_Pi_WeatherSense sudo python3 WeatherSenseMonitor.py
and in a different windwow
cd SDL_Pi_WeatherSense cd dash_app sudo python3 index.py
Attachments:
|
|
|
Post by gimli4284 on Dec 7, 2022 12:42:07 GMT -8
Should I maybe be using SkyWeather2 instead of WeatherSense? I am not familiar with the difference, but I know my dashboard doesn't have "LEDs", though WeatherSense does seem to support the newest devices.
|
|
|
Post by SDL on Dec 8, 2022 10:19:11 GMT -8
yes, the dash board there doesn't have LEDs. You need more hardware to run SkyWeather2 (the hat board).
BP
|
|