|
Post by les1397 on Dec 12, 2022 5:14:58 GMT -8
Im Hoping someone can steer me in the right direction. Im Learning but dont know enough to diagnose issues. My Station was working great for that last 3 months but now all of a sudden there is no info on weatherstem..? The dash works fine and I looked at the SDR 433 index sending and it seems like its gathering the information .. I just dont know why weatherstem doesn't show it.... maybe Sql..? Ideas what to test..? Thanks.. Les Attachments:
|
|
|
Post by Jason on Dec 12, 2022 9:44:27 GMT -8
I'm fairly sure something is broken on the WeatherSTEM side. Looking for confirmation from SDL though.
Thanks,
Jason
|
|
|
Post by les1397 on Dec 12, 2022 16:10:33 GMT -8
Thanks Jason, I did look at the weather steam config but all the details are good and the same as it was when it was working... It has (weathersteam - true) in the Json file and I even remade the Json file just in case but no luck..
Les
|
|
|
Post by les1397 on Dec 14, 2022 4:13:27 GMT -8
So I still Cant figure this out why in the DASh app that the camera works and the other sensor are reading plus the details in the SkyWeatherConfigure are right but Weatherstem just doesn't display any. Im not sure if you can delete that account in weatherstem and make a new one with the same code? It maybe my only choice to try but wonder since i have the same code that it would just lock me out and say the code has been used. As far as i can see the SDR 433 is working as I wouldnt have any sensors otherwise, and they are working. The Wifi works or my VNC wouldnt work also. But I can VNC fine. Im Lost at what has changed.. Hopefully someone will give me a lifeline for Christmas But Merry Christmas to you all anyway and happy New Year. Les
|
|
tecronin
Junior Member
Posts: 91
Raspberry Pi: Yes
|
Post by tecronin on Dec 14, 2022 18:43:08 GMT -8
i had just replaced my batteries and can see the sensors being read in the logs but also seeing the same blank page on weather stem skyweather.weatherstem.com/tec-weather1from logs: duplicate found Processing F016TH data This is the raw data: {"time" : "2022-12-14 20:42:22", "model" : "SwitchDoc Labs F016TH Thermo-Hygrometer", "device" : 105, "modelnumber" : 5, "channel" : 1, "battery" : "OK", "temperature_F" : 67.300, "humidity" : 40, "mic" : "CRC"} processing FT020T Data This is the raw data: {"time" : "2022-12-14 20:42:34", "model" : "SwitchDoc Labs FT020T AIO", "device" : 12, "id" : 0, "batterylow" : 0, "avewindspeed" : 62, "gustwindspeed" : 79, "winddirection" : 274, "cumulativerain" : 90, "temperature" : 797, "humidity" : 86, "light" : 0, "uv" : 0, "mic" : "CRC"}
|
|
|
Post by johnso515 on Dec 15, 2022 5:31:22 GMT -8
I think there is something wrong on the weatherstem end. Several of us have had similar issues. I, also, have been connected to Weatherstem without issues for over a year until about a week ago.
|
|
|
Post by les1397 on Dec 15, 2022 11:38:20 GMT -8
Seems Like The Issue to me, I hope they sort this out or someone gives us an idea how to fix it soon.
Thanks for the reply Guys.. Merry Christmas.
|
|
|
Post by SDL on Dec 15, 2022 12:00:27 GMT -8
They may have stopped accepting data. Kind of like Blink.
BP
|
|
waltb
New Member
Posts: 8
Raspberry Pi: Yes
|
Post by waltb on Dec 19, 2022 21:44:18 GMT -8
I’m having the same problem. No data gets to the web site, though SkyWeather software seems to think everything is OK.
Emails to WeatherStem support are unanswered, though my previous support question to them went unanswered for many weeks. (Question: When would WeatherStem’s API support SkyWeather? Answer: Never.)
I’m unable to have access to the Blackberry for another two weeks, so in the meantime I have to think this is a purely web hosting issue, such as WeatherStem dropping support for SkyWeather.
|
|
|
Post by SDL on Dec 20, 2022 13:17:53 GMT -8
I don't exactly know what happened. But the rumors are around here that WeatherStem is discontinuing that portion of their service due to financial issues. I think they are done.
BP
|
|
|
Post by les1397 on Dec 21, 2022 4:31:58 GMT -8
That all sound very sad if they drop off, I sent an Email but nothing yet, I don't know why they didn't just charge even like a couple of dollars a month for the use of it as that would help the cause and I'm sure most wouldn't care, I wouldn't. So if they have dropped off and out .. Is there any alternatives for this Kit...? I have a sister that looks at mine from afar and is in withdrawal that its down...
|
|
|
Post by les1397 on Dec 23, 2022 7:47:36 GMT -8
Hi again, So Im at a stand point on the WeatherSteam displaying so I thought I would check the station from VNC and did this below. Im not sure if its just because the system is already running or something is bad... Ideas ? for "Out of resources".
Les
pi@SwitchDocLabs:~/SDL_Pi_SkyWeather2 $ sudo python3 testSkyCamera.py ./SkyWeather2.JSON File exists config.STATIONKEY= nu6mq84e taking SkyPicture mmal: mmal_vc_port_enable: failed to enable port vc.null_sink:in:0(OPQV): ENOSPC mmal: mmal_port_enable: failed to enable connected port (vc.null_sink:in:0(OPQV))0x231cea0 (ENOSPC) mmal: mmal_connection_enable: output port couldn't be enabled Traceback (most recent call last): File "testSkyCamera.py", line 17, in <module> SkyCamera.takeSkyPicture() File "/home/pi/SDL_Pi_SkyWeather2/SkyCamera.py", line 35, in takeSkyPicture camera = picamera.PiCamera() File "/usr/lib/python3/dist-packages/picamera/camera.py", line 433, in __init__ self._init_preview() File "/usr/lib/python3/dist-packages/picamera/camera.py", line 513, in _init_preview self, self._camera.outputs[self.CAMERA_PREVIEW_PORT]) File "/usr/lib/python3/dist-packages/picamera/renderers.py", line 558, in __init__ self.renderer.inputs[0].connect(source).enable() File "/usr/lib/python3/dist-packages/picamera/mmalobj.py", line 2212, in enable prefix="Failed to enable connection") File "/usr/lib/python3/dist-packages/picamera/exc.py", line 184, in mmal_check raise PiCameraMMALError(status, prefix) picamera.exc.PiCameraMMALError: Failed to enable connection: Out of resources
|
|
|
Post by SDL on Dec 26, 2022 10:26:32 GMT -8
Try killing any SkyWeather processes running in the background. The run your test again.
BP
|
|
|
Post by les1397 on Dec 26, 2022 11:01:15 GMT -8
Thanks, Yes I have been looking as much as I know to see if I can figure if there is anything this end not working. I killed the SkyWeather2 like you mentioned now and then did a testSkyWeatherSensors.py and it's all working fine. It all finds the sensors and tick: with all the readings .. The station shows up in Weatherstem and its all fine in the Dash App, with camera and readings. In weatherstem if i click on the station address it's just there with Blank readings as below with same Handle... I cant check their end as its limited on what is in my login but all the details like Station key is fine. I emailed WeatherStem but not reply.Just lost for trying anything else but I feel it all reads fine. I just wonder that if they stopped service everyone else would be in the same boat.. (I know some are, just not all) Thanks any Ideas would help but as you mention just seems there end, But I need it on the Net. Regards Les Attachments:
|
|
|
Post by les1397 on Dec 31, 2022 11:49:01 GMT -8
Hi wishing everyone a Great New Year as i'm looking forward to it as we just had someone drive down the hill and crash into our garage and smash off the door and the car in the garage. !
And so Looks like this issue isn't going away.. I'm Wondering if getting another key like i got when i bought the kit and resetting it up with a new online Weatherstem would fix my problem? since it seems to be there end..?
Regards Les
|
|