pjd3
New Member
Posts: 3
|
Post by pjd3 on Dec 14, 2022 14:23:56 GMT -8
I purchased the SmartGarden 3d Enclosure but: - The SmartGarden 3d Print I have doesn't look like the parts shown in SmartGardenSystemExt3DPrintAssemblyl1.1.
- The bottom assembly fits the extension board (but one of the screw holes doesn't line up.
- The "roof" I have is blue and is much flatter than the roof in the assembly instructions and doesn't line up with the screw hols in the base at all
- There is no extender platform.
- I do have a small rectangular piece but no idea where it goes
- the slot in the where I assume the led goes is too small to fit the LED.
Are there current instructions for assembling the 3d extension enclosure that show the assembly for the parts I was sent?
|
|
|
Post by SDL on Dec 14, 2022 15:19:41 GMT -8
Can you post some pictures? We can figure this out! I suspect that we shipped you the wrong one. This is SmartGarden3? Are you sure you got the right manual?
BP
|
|
pjd3
New Member
Posts: 3
|
Post by pjd3 on Dec 15, 2022 5:35:00 GMT -8
|
|
|
Post by SDL on Dec 15, 2022 12:05:05 GMT -8
|
|
pjd3
New Member
Posts: 3
|
Post by pjd3 on Dec 15, 2022 13:32:51 GMT -8
Thanks - no issues with assembling the boards and installing the SW but still no instructions on how to assemble it all in the enclosure - the "roof" has no holes that line up with the base - the led does not fit in the space provided
|
|
|
Post by SDL on Dec 19, 2022 9:28:14 GMT -8
You somehow got the wrong roof. Mine aligns but is different than yours. We can send you that.
The LED should fit. If it dosen't, work out a little of the plastic and make it fit.
PM me your shipping address and we will send you a new roof!
BP
|
|
|
Post by pjd2023 on Jan 12, 2023 14:37:35 GMT -8
Ive been out of town and didnt see the reply.
My address is
5475 Hampstead Way Duluth GA 30097
|
|
|
Post by SDL on Jan 12, 2023 15:56:43 GMT -8
Ive been out of town and didnt see the reply. My address is 5475 Hampstead Way Duluth GA 30097 Name too? And phone number. PM me. BP
|
|