|
Post by thotha on Feb 15, 2023 1:45:19 GMT -8
On your product web site you write with link you sell "Additional SmartGarden3 Extender (same as Base Unit)". But if I klick on it I will only get back to the main page of the full SmartGarden3 Kit.
Question: I would like to setup one base SmartGarden3 Kit for 14 growing zones with the following parts
14 Bluetooth Soil Sensors 14 small pumps or maybe better small valves for the zones 2 Main pressure pumps which should be able to level approx 120cm in height with enough pressure 1 Solar module for charging und running the SmartGarden 3 base unit
? needed amount of solar modules to run the SmartGarden3 Extenders
Is this feasible with SmartGarden3 or do I need to look for other solutions?
Thank you for anyone's feedback
Attachments:
|
|
|
Post by SDL on Feb 16, 2023 9:14:33 GMT -8
An Extender is the same as the base kit. No difference turns out.
Yes, that is possible. You would need 4 extenders to handle the 16 pumps. If you have a mix of USB and wired pumps, you could get away with fewer extenders.
Regarding solar systems, SolarMAX2 will handle all of the units. The problem is not so much the extender units, but driving the pumps. If the pumps use a lot of power then you have to take that into account.
BP
|
|