|
Post by SDL on May 30, 2017 9:21:24 GMT -8
The other thing that we are scheduled to check out is an intermittent problem where in high wind conditions > 25mph, the wind can jump up to 500mph! definitely some kind of a software problem.
It's some kind of interrupt overrun or something like that.
BP
|
|
milo
New Member
Posts: 18
|
Post by milo on Jun 14, 2017 1:35:42 GMT -8
Any news about the update?
|
|
|
Post by SDL on Jun 15, 2017 19:03:15 GMT -8
I don't have the full punch list yet. It will be documented in the README.md
BP
|
|
milo
New Member
Posts: 18
|
Post by milo on Jun 24, 2017 7:55:00 GMT -8
Where do I need to plugin the sunlight sensor?
|
|
|
Post by SDL on Jun 24, 2017 15:30:24 GMT -8
|
|
milo
New Member
Posts: 18
|
Post by milo on Jun 30, 2017 0:33:25 GMT -8
Any news about the update?
|
|
|
Post by SDL on Jun 30, 2017 8:00:21 GMT -8
Right now we have fixed a series of "initialization" problems that included the one you found.
Looks like that is what will be released on Monday, July 3rd.
BP
|
|
|
Post by Xxxx on Jul 5, 2017 21:41:42 GMT -8
Any news?
|
|
|
Post by SDL on Jul 6, 2017 14:33:50 GMT -8
It's going out today! I'll come back here and post when it hits GitHub.com/switchdoclabs
BP
|
|
|
Post by SDL on Jul 6, 2017 15:51:48 GMT -8
And 2.93 of GroveWeatherPi is now available up on Github.com/switchdoclabs
SDL_Pi_GroveWeatherPi
BP
|
|
milo
New Member
Posts: 18
|
Post by milo on Jul 7, 2017 7:51:07 GMT -8
sorry for bothering you gain but new SW and I can't start
Test SDL_Pi_TCA9545 Version 1.0 - SwitchDoc Labs
Sample uses 0x73
Program Started at:2017-07-07 17:45:56
-----------BUS 0-------------------
tca9545 control register B3-B0 = 0x1
ignore Interrupts if INT3' - INT0' not connected
tca9545 control register Interrupts = 0x0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: 40 -- -- -- -- -- -- -- 48 -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- 57 -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- 68 -- -- -- -- -- -- --
70: -- -- -- 73 -- -- -- 77
-----------------------------------
-----------BUS 1-------------------
tca9545 control register B3-B0 = 0x2
ignore Interrupts if INT3' - INT0' not connected
tca9545 control register Interrupts = 0x0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 03 -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- 73 -- -- -- --
-----------------------------------
-----------BUS 2-------------------
tca9545 control register B3-B0 = 0x4
ignore Interrupts if INT3' - INT0' not connected
tca9545 control register Interrupts = 0x0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: 40 -- -- -- -- -- -- -- 48 -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- 73 -- -- -- --
-----------------------------------
-----------BUS 3-------------------
tca9545 control register B3-B0 = 0x8
ignore Interrupts if INT3' - INT0' not connected
tca9545 control register Interrupts = 0x0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- 73 -- -- -- --
-----------------------------------
-----------BUS 0-------------------
tca9545 control register B3-B0 = 0x1
ignore Interrupts if INT3' - INT0' not connected
tca9545 control register Interrupts = 0x0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: 40 -- -- -- -- -- -- -- 48 -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- 57 -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- 68 -- -- -- -- -- -- --
70: -- -- -- 73 -- -- -- 77
-----------------------------------
-----------BUS 1-------------------
tca9545 control register B3-B0 = 0x2
ignore Interrupts if INT3' - INT0' not connected
tca9545 control register Interrupts = 0x0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 03 -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- 73 -- -- -- --
-----------------------------------
-----------BUS 2-------------------
tca9545 control register B3-B0 = 0x4
ignore Interrupts if INT3' - INT0' not connected
tca9545 control register Interrupts = 0x0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: 40 -- -- -- -- -- -- -- 48 -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- 73 -- -- -- --
-----------------------------------
-----------BUS 3-------------------
tca9545 control register B3-B0 = 0x8
ignore Interrupts if INT3' - INT0' not connected
tca9545 control register Interrupts = 0x0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- 73 -- -- -- --
-----------------------------------
^CTraceback (most recent call last):
File "testSDL_Pi_TCA9545.py", line 122, in <module>
time.sleep(5.0)
KeyboardInterrupt
pi@weatherstation:~/SDL_Pi_GroveWeatherPi/SDL_Pi_TCA9545 $ cd ..
pi@weatherstation:~/SDL_Pi_GroveWeatherPi $ sudo python GroveWeatherPi.py
WXLink Reset
Traceback (most recent call last):
File "GroveWeatherPi.py", line 362, in <module>
bmp280 = BMP280.BMP280()
File "./Adafruit_Python_BMP/Adafruit_BMP/BMP280.py", line 46, in __init__
self._device = i2c.get_i2c_device(address, **kwargs)
File "./Adafruit_Python_GPIO/Adafruit_GPIO/I2C.py", line 65, in get_i2c_device
busnum = get_default_bus()
File "./Adafruit_Python_GPIO/Adafruit_GPIO/I2C.py", line 57, in get_default_bus
raise RuntimeError('Could not determine default I2C bus for platform.')
RuntimeError: Could not determine default I2C bus for platform.
|
|
|
Post by SDL on Jul 7, 2017 11:52:15 GMT -8
Hmm.. I've seen this before. Some install problem. I'll be back to you.
BP
|
|
|
Post by miloo on Jul 8, 2017 9:50:41 GMT -8
Thanks
|
|
|
Post by SDL on Jul 9, 2017 18:33:19 GMT -8
OK, I think it is an installation problem on your machine. Make sure you do this (from the README.md file).
Note some configurations of Raspberry Pi software requres the following:
sudo apt-get update sudo apt-get install build-essential python-pip python-dev python-smbus git git clone https://github.com/adafruit/Adafruit_Python_GPIO.git cd Adafruit_Python_GPIO sudo python setup.py install
BP
|
|
milo
New Member
Posts: 18
|
Post by milo on Jul 11, 2017 21:18:44 GMT -8
Thanks bad SD card installation
|
|