|
Post by rahlquist on Aug 18, 2017 7:49:02 GMT -8
Hope you dont mind me starting a thread like this here. Maybe some others will have thoughts and comments. One thing I would like to see if you ever do a new version of this board, is for a standard connector (or even just standard pin spacing for one) for the temperature probe. For example when shopping for them while waiting for my board I was able to procure one that has a connector. ( imgur.com/a/BmaDx )
|
|
|
Post by Powderjockey on Aug 19, 2017 11:32:55 GMT -8
May have the holes in the board moved so they line up with the holes on the RPi so they coule be connected with a couple of riser screws. With the other board mounted on the GPIOs it needs compacting. Grove wires with 90 degree connectors would help things as well!
|
|
|
Post by SDL on Aug 19, 2017 12:21:52 GMT -8
No problem with this list! I think this is a great idea.
We will put the two things on the list.
1) Look at having a standard Temperature probe connector (for the thermistor)
2) Align the holes for a Raspberry PI (this is a problem, given that they move the holes on virtually every new board)
BP
|
|