ed
New Member
Posts: 1
|
Post by ed on Aug 21, 2017 11:06:34 GMT -8
I recently purchased the INA3221 for a remote solar monitoring application. when I investigated the charge controllers I planned to use, I found that they used low side regulation. all the positive inputs were tied together.
I want to monitor the solar input, battery and load.
any recommendations of how to use the INA3221 in this environment?
|
|
|
Post by SDL on Aug 22, 2017 16:41:16 GMT -8
I would look into the INA3221 specification and consider using differential mode. Then you should be able to handle that I believe. You may have to modify some drivers.
What an odd architecture! I'm not sure what the advantage would be..
BP
|
|