Post by kkalbaugh on Apr 2, 2018 10:39:25 GMT -8
I am totally stumped. Finally got our RMA thunder board back and it is not getting detected either. I saw the post from John and cut the yellow and white on the I2C port.
So what about the interrupt port, I assume leave it hooked up to D13/D16?
I've tried this and still no lighting detector:
Pi2Grover / D13/D16 ___ MOD-1016G / Grove IRQ(Grove INT)
4 Chan I2C Mux / Grove J3 / Bus1 ___ MOD-1016 / Grove I2C
Test SDL_Pi_TCA9545 Version 1.0 - SwitchDoc Labs
Sample uses 0x73
Program Started at:2018-04-02 14:33:15
-----------BUS 0-------------------
tca9545 control register B3-B0 = 0x1
ignore Interrupts if INT3' - INT0' not connected
tca9545 control register Interrupts = 0x0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: 40 -- -- -- -- -- -- -- 48 -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: 60 -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- 73 -- -- -- 77
-----------------------------------
-----------BUS 1-------------------
tca9545 control register B3-B0 = 0x2
ignore Interrupts if INT3' - INT0' not connected
tca9545 control register Interrupts = 0x0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: 60 -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- 73 -- -- -- --
-----------------------------------
...
deviceID = 0x1050
visible= 0
GroveWeatherPi Solar Powered Weather Station Version 2.99 - SwitchDoc Labs
Program Started at:2018-04-02 14:33:56
----------------------
I2C Mux - TCA9545: Present
BMP280: Present
DS3231: Not Present
HDC1080: Present
HTU21DF: Not Present
AM2315: Present
ADS1015: Not Present
ADS1115: Present
AS3935: Not Present
OLED: Not Present
SunAirPlus: Present
Sunlight Sensor: Present
WXLink: Not Present
UseMySQL: Present
Check WLAN: Present
WeatherUnderground: Not Present
----------------------
-----------------
SunAirPlus Sampling
-----------------
-----------------
Scheduled Jobs
-----------------
Jobstore default:
sampleAndDisplay (trigger: interval[0:00:10], next run at: 2018-04-02 14:34:09 EDT)
patTheDog (trigger: interval[0:00:10], next run at: 2018-04-02 14:34:09 EDT)
blinkSunAirLED2X (trigger: interval[0:00:10], next run at: 2018-04-02 14:34:09 EDT)
tick (trigger: interval[0:01:00], next run at: 2018-04-02 14:34:59 EDT)
sampleWeather (trigger: interval[0:05:00], next run at: 2018-04-02 14:38:59 EDT)
sampleSunAirPlus (trigger: interval[0:05:00], next run at: 2018-04-02 14:38:59 EDT)
writeWeatherRecord (trigger: interval[0:05:00], next run at: 2018-04-02 14:38:59 EDT)
writePowerRecord (trigger: interval[0:05:00], next run at: 2018-04-02 14:38:59 EDT)
updateRain (trigger: interval[0:05:00], next run at: 2018-04-02 14:38:59 EDT)
checkForShutdown (trigger: interval[0:05:00], next run at: 2018-04-02 14:38:59 EDT)
sampleWeather (trigger: interval[0:15:00], next run at: 2018-04-02 14:48:59 EDT)
sampleSunAirPlus (trigger: interval[0:15:00], next run at: 2018-04-02 14:48:59 EDT)
WLAN_check (trigger: interval[0:30:00], next run at: 2018-04-02 15:03:59 EDT)
-----------------
-----------------
Local WeatherRack Weather Sensors Sampling
-----------------
Rain Total= 0.00 in
Rain Last 60 Minutes= 0.00 in
Wind Speed= 0.00 MPH
MPH wind_gust= 0.00 MPH
Wind Direction= 180.00 Degrees
------Patting The Dog-------
Wind Direction Voltage= 1.368 V
-----------------
-----------------
DS3231 Real Time Clock Not Present
-----------------
-----------------
BMP280 Barometer
-----------------
Temperature = 26.01 C
Pressure = 99.77 KPa
Altitude = 130.19 m
Sealevel Pressure = 102.00 KPa
-----------------
-----------------
Sunlight Vi/IR/UV Sensor
-----------------
Sunlight Visible(Lux): 65.98
Sunlight IR(Lux): 461.07
Sunlight UV Index: 0.87
-----------------
HDC1080 Temp/Hum
-----------------
Temperature = 25.35 C
Humidity = 18.43 %
-----------------
HTU21DF Temp/Hum Not Present
-----------------
-----------------
-----------------
AS3935 Lightning Detector Not Present
-----------------
-----------------
-----------------
AM2315 Temperature/Humidity Sensor
-----------------
outsideTemperature: 24.7 C
outsideHumidity: 20.6 %
crc: 1
-----------------
-----------------
-----------------
-----------------
SunAirPlus Currents / Voltage
-----------------
LIPO_Battery Bus Voltage: 4.20 V
LIPO_Battery Shunt Voltage: -1.76 mV
LIPO_Battery Load Voltage: 4.20 V
LIPO_Battery Current 1: -17.60 mA
Battery Power 1: -0.07 W
Solar Cell Bus Voltage 2: 0.04 V
Solar Cell Shunt Voltage 2: 0.00 mV
Solar Cell Load Voltage 2: 0.04 V
Solar Cell Current 2: -0.00 mA
Solar Cell Power 2: -0.00 W
Output Bus Voltage 3: 4.95 V
Output Shunt Voltage 3: 19.76 mV
Output Load Voltage 3: 4.95 V
Output Current 3: 197.60 mA
Output Power 3: 0.98 W
------------------------------
You guys have been very helpful, I just don't understand why this is not working.