|
|
Post by sibrown on Jan 11, 2018 9:37:59 GMT -8
Hi, Purchased the WeatherPlus Board to build a weather station that can be connected the my Pi, only i am finding it hard to get any info our than through to OurWeather which is all for Arduino? is that correct? or are for the GroveWeatherPi
Link on product page and Github go nowhere.
Have i purchase the wrong item
|
|
|
|
Post by SDL on Jan 12, 2018 6:33:05 GMT -8
Well, yes and no. You can hook up your weather station on the WeatherPlus and easily read information from the WeatherPlus board via the REST interface into your Pi. We do that with our Raspberry Pi DataLogger (see switchedoc.com or GitHub.com/switchdoclabs for the software). The WeatherPlus board is in the heart of our OurWeather product so look for the OurWeather software on out GitHub.com/switchdoclabs You can do all the setup of the board via the web interface described in the OurWeather manuals. So you can do that easily. If you want to work with the Raspberry Pi more intimately, check out Our GroveWeatherPi product which is based on the WeatherBoard. shop.switchdoc.com/products/the-weather-board-w-grove-interface-board-for-weather-instruments-for-raspberry-pi-arduinoBP |
|
