kan
New Member
Posts: 8
|
Post by kan on Feb 26, 2018 12:53:43 GMT -8
Hi,
Can I use a Raspberry pi 2 or Raspberry pi 3 in place of the A+ or 0?
Also, is there a step by step tutorial I can find somewhere that tells me how to load an operating system onto the Pi?
Which operating system is required to be uploaded onto the Pi?
Regards,
Kan
|
|
|
|
Post by SDL on Feb 26, 2018 13:35:12 GMT -8
Ken,
Yes, absolutely you can use a RPi2 or RPi3 instead of the A+ or 0. We do all of our development on the RPI3 then move to the 0 or W for deployment.
Raspberrypi.org has such tutorials. I'd start with NOOBS and use a keyboard mouse and monitor to begin with.
Use "Stretch" which is the latest version.
BP
|
|
kan
New Member
Posts: 8
|
Post by kan on Feb 26, 2018 13:48:48 GMT -8
Great thanks.
Can you provide me with a list of everything that is included in the GroveWeatherPi kit?
It does not say which sensors are included on the "shop" page.
|
|
|
|
Post by SDL on Feb 26, 2018 13:53:04 GMT -8
Here you go. This is on the shop page.
Pi2Grover
Weather Board (with BMP280)
Grove AM2315
WeatherRack
Grove I2C 4Ch/16Bit ADC
4 female/female jumper wires (added on 11/6/2016)
Grove OLED 64x128 I2C Display
HDC1080
Grove 20CM Cables (6)
Grove 50cm Calbes (2)
Grove I2C 4 Channel Mux
Grove Lightning Detector - MOD-1016G
DS3231 RTC
I2C 4 Port Passive Hub
BP
|
|
