I have setup everything as per instructions. And tested. My question is how do I make it my own...ie
i will have an DHT11 Sensor hooked up and want to transmit temp and humidity. Also will be the camera feed, two relays and 1 PWM hookup. I would like to control these all via raspiconnect. Could you give me some general direction on how to start.
could you point me to the "pretty complete but could be expanded" examples??? I'm reasonably experienced and I was able to get action buttons set up and executing commands, but I can't find any examples for the other controls, meters or server status, etc. The only documentation I can find simply says the response should return a "2" for server present. What am I doing wrong?
if (objectType == SERVER_STATUS_UITYPE):
if (Config.debug()): print "SERVER_STATUS_UITYPE of %s found" % objectServerID
# SS-1 - Send RasPiConnectServer status if (objectServerID == "SS-1"):
#check for validate request # validate allows RasPiConnect to verify this object is here if (validate == "YES"): outgoingXMLData += Validate.buildValidateResponse("YES") outgoingXMLData += BuildResponse.buildFooter() return outgoingXMLData
# not validate request, so execute
# note that python is in the main directory for this call, not the local directory