|
|
Post by faraday on Jun 2, 2018 7:34:53 GMT -8
I read your blog post about the BC24. I'm about to pledge (I want the Dual Pack) but I have a couple of questions:
1) I see an LED on the board. Is that connected to a GPIO?
2) You mentioned that the USB port is moving on the production version. To where?
3) Is the MODE button available for user programs?
4) How do you set the SSID and Password if you don't want to recompile the code to run the Clock and the Dow Jones display in the demo program?
Thanks for a fun product! This will be a great addition to your line.
Faraday
|
|
|
|
Post by SDL on Jun 2, 2018 7:46:09 GMT -8
Answers for Faraday! Long time no hear from. Here is a link to the kickstarter: bit.ly/SDBC24LAUNCH1) I see an LED on the board. Is that connected to a GPIO?It is connected to GPIO13. And I just tested it. It works! I hadn't done that yet! We are releasing to Manufacturing next week, so good thing I did. 2) You mentioned that the USB port is moving on the production version. To where?It is gong on the left side of the board. It was a stupid decision to put it on the bottom. What where we thinking! 3) Is the MODE button available for user programs?Absolutely. John wrote a blog article on how to use this button. www.switchdoc.com/2018/04/esp32-tutorial-debouncing-a-button-press-using-interrupts/4) How do you set the SSID and Password if you don't want to recompile the code to run the Clock and the Dow Jones display in the demo program?We are using the SmartConfig on a smart phone. You connect to the BC24 by using the android or iPhone app and hitting the button on the app when the BC24 blinks white at power on. We are having a blast with our two prototypes. I'm building a solar powered nightlight to put outside. Shows the Dow Jones during the day and random patterns at night. Drives the wife crazy. BP |
|
|
|
Post by SDL on Jun 16, 2018 12:53:49 GMT -8
Faraday,
Thanks for the email. The BC24 parts arrive yesterday and they will be shipped right after the Kickstarter ends. If you want, you can pre-order more BC24's on shop.switchdoc.com
We have the page up for pre-orders but don't have the downloads are product description up.
BP
|
|
|
|
Post by khorne on Aug 5, 2018 4:57:04 GMT -8
Hi,
I would like to build a case for my BC24, Have you guys got any mechanical drawings of the board to assist in building a case?
|
|
|
|
Post by SDL on Aug 5, 2018 11:34:50 GMT -8
Hello khome!
From the specification:
Physical dimensions of board: 89mm x 98mm x 10.5mm(max). Mounting holes inset 2.15mm x 2.15mm from each corner to center of hole. Diameter of hole 2mm.
BP
|
|
