|
Post by faraday on Jul 10, 2018 7:03:09 GMT -8
Hi,
I have my BC24 up and working and have loaded V007 on the unit. I'm using a Mac and following the instructions from the Adafruit page worked for me.
I just wanted to ask if you are going to sell an enclosure for the BC24, especially relating to the outdoor Solar night light project.
I'd like to buy that as a kit if possible.
Faraday
|
|
|
Post by SDL on Jul 10, 2018 7:06:58 GMT -8
Faraday,
Nice to hear that you have it all up and working!
We are going to be supplying a full kit for the solar project in the near future. I just asked John and he said he has a bit of software to finish (to add the clock to the SOLARNL package and provide the REST commands for controlling it) and then we can write the assembly instructions and release the kit.
As usual, we are not going to supply a 3.7V LiPo battery, but we are going to use the SunAIrPlus board and we are thinking of providing the 3D Printed parts as a separate item.
BP
|
|