|
|
Post by Powderjockey on Jul 10, 2018 19:04:08 GMT -8
How do you set the time/unit to read the correct time? I'm 6 hours too fast and should be GMT -6.
|
|
|
|
Post by SDL on Jul 11, 2018 6:22:04 GMT -8
In version 007, you have to set the variable in the code (which requires a recompile) . We will add a REST command to do this in V008.
ClockTimeOffsetToUTC = -25200;
BP
|
|
|
|
Post by Powderjockey on Jul 11, 2018 17:37:49 GMT -8
In version 007, you have to set the variable in the code (which requires a recompile) . We will add a REST command to do this in V008. ClockTimeOffsetToUTC = -25200;BP I played around with changing that number and even made the number positive and there was no change in the position of the LED's, yes I recompiled and uploaded. |
|
|
|
Post by SDL on Jul 11, 2018 19:01:56 GMT -8
Guess what! Bug time! Reseting the preferences by using the button clears the ClockTimeOffsetToUTC to 0!
I'll fix up a default reset value and post it up as V008 in a few minutes. You will need to clear the preferences and reset your Wifi (holding MODE button down when hitting reset)
Nice that you can compile things now!
BP
|
|
|
|
Post by SDL on Jul 11, 2018 19:19:03 GMT -8
|
|
|
|
Post by Powderjockey on Jul 12, 2018 8:21:14 GMT -8
Nice that you can compile things now! BP Only on the Linux laptop. I removed the IDE, deleted all of the Arduino folders, then started from scratch and I still have errors. I'm stumped. |
|
|
|
Post by Powderjockey on Jul 12, 2018 11:27:21 GMT -8
I don't see any difference, do you change that number? (-25200) |
|
|
|
Post by SDL on Jul 12, 2018 16:49:07 GMT -8
You have to perform a reset to get the default to work on your BC24 - Hold the MODE button down while you push the reset button momentarily. This will erase your WiFi too.
Then it will use that number for the default.
BP
|
|
|
|
Post by Powderjockey on Jul 16, 2018 17:32:33 GMT -8
Would something like this not be more effective in changing the time zone?
/**The MIT License (MIT)
Copyright (c) 2015 by Daniel Eichhorn
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in alc
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
See more at http://blog.squix.ch
*/
#include <simpleDSTadjust.h>
// Setup
const int UPDATE_INTERVAL_SECS = 10 * 60; // Update every 10 minutes
boolean USE_TOUCHSCREEN_WAKE = true; // use the touchscreen to wake up, ~90mA current draw
boolean DEEP_SLEEP = false; // use the touchscreen for deep sleep, ~10mA current draw but doesnt work
int AWAKE_TIME = 5; // how many seconds to stay 'awake' before going back to zzz
// Pins for the ILI9341
#define TFT_DC 15
#define TFT_CS 0
// pins for the touchscreen
#define STMPE_CS 16
#define STMPE_IRQ 4
// TimeClient settings
//#define UTC_OFFSET + 1
//struct dstRule StartRule = {"CEST", Last, Sun, Mar, 2, 3600}; // Central European Summer Time = UTC/GMT +2 hours
//struct dstRule EndRule = {"CET", Last, Sun, Oct, 2, 0}; // Central European Time = UTC/GMT +1 hour
// Settings for Cranbrook
#define UTC_OFFSET -7
struct dstRule StartRule = {"MDT", Second, Sun, Mar, 2, 3600}; // Mountain Daylight time = UTC/GMT -6 hours
struct dstRule EndRule = {"MST", First, Sun, Nov, 1, 0}; // Mountain Standard time = UTC/GMT -7 hour
/***************************
* End Settings
**************************/
|
|
|
|
Post by SDL on Jul 17, 2018 16:47:09 GMT -8
Interesting. I see where are you going with this. Let's see how setting it using REST goes.
BP
|
|
