|
Post by SDL on Jul 22, 2018 4:42:31 GMT -8
ddparker,
Can you give more of the message? You almost seem to be cursed.
Are you compiling those other sketches for the Adafruit ESP32 Feather or just the feather doesn't work?
Did you install the ESP32 by putting the link into preferences in the Arduino IDE?
BP
|
|
|
Post by Powderjockey on Jul 22, 2018 7:37:05 GMT -8
I just cannot win I started with fresh everything and got a new msg. I tried many other sketches and they work just fine. exit status 1 Error compiling for board Adafruit ESP32 Feather. Double D,
Does your screen look the following? Take a screen shot and post. Then we'll move on to the next item.
|
|
|
Post by ddparker on Jul 22, 2018 15:51:43 GMT -8
'''''' SUCCESS AT LAST!!!!! After 2 other Macs - an iMac, a MacBook Pro and now a MacBook Air we have an operating sketch. The MacBook Air had never had Arduino IDE on it. I went step by step and Voila!! we have Contact... Now all I need to do is get the wifi up and running...
|
|
|
Post by Powderjockey on Jul 22, 2018 17:19:50 GMT -8
Good to hear. The wifi will come. Which phone OS are you using, Andoird or iOS?
|
|
|
Post by ddparker on Jul 22, 2018 21:33:15 GMT -8
Both
|
|
|
Post by Powderjockey on Jul 23, 2018 17:58:32 GMT -8
I have IOT Expressif installed on a Blackberry Passport which has worked OK. I have an old iPhone 4 in the house, so I install both Expressif and SmartConfig on it. The unit I have is connected and haven't been able to try the SmartConifg app.
Expressif seemed to locate the BC24, not much to do other than to tap OK once it found it. It did take a couple of goes.
I have a WPS router, but was too lazy to go down and push the button. Can't comment on how this part works.
I had trouble getting the connected to the BC24 with the web browser (192.168.4.1) A couple of times the browser window opened up, but nothing more. No blue buttons with the SSID's. The last time I tried it did work and was actually very easy to connect using the browser, but it was not easy to get the BC24 to play nice to get to the browser.
Patience.
|
|
|
Post by Powderjockey on Jul 24, 2018 18:09:50 GMT -8
New BC24 arrived to today and connecting to the wifi did not work with the SmartConfig. IOT Expressif work first time.
|
|
|
Post by SDL on Jul 25, 2018 13:30:53 GMT -8
Odd. On the same phone?
BP
|
|
|
Post by Powderjockey on Jul 25, 2018 16:17:40 GMT -8
Odd. On the same phone? BP yes.
|
|
|
Post by SDL on Jul 25, 2018 16:21:03 GMT -8
I have the source code to build our own app for this and I'm considering doing this. At least then we would understand what is going on. The smartconfig is really a handy way of provisioning.
BP
|
|