Post by triggerfish on Sept 27, 2018 12:22:38 GMT -8
I received the sensor recently and wish to use it in my GroveWeatherPi setup. But where do I plug it? Is it part of the weastherboard nus and dhould I plug it into the HUB, or can I plug it in the free J5 grove on the mux?
Post by triggerfish on Sept 28, 2018 8:04:30 GMT -8
When the Vi/UV/IR is plugged in the mux Bus3, the mux can not be found anymore...
>>>>>>>>>>>>>>>>>>><<<<<<<<<<< TCA9545 I2C Mux Not Present >>>>>>>>>>>>>>>>>>><<<<<<<<<<< Error accessing 0x48: Check your I2C address Error accessing 0x48: Check your I2C address Type Error
GroveWeatherPi Solar Powered Weather Station Version 3.02 - SwitchDoc Labs
Program Started at:2018-09-28 18:01:30
---------------------- I2C Mux - TCA9545: Not Present BMP280: Not Present DS3231: Not Present HDC1080: Not Present HTU21DF: Not Present AM2315: Not Present ADS1015: Not Present ADS1115: Not Present AS3935: Not Present OLED: Not Present SunAirPlus: Not Present Sunlight Sensor: Not Present WXLink: Not Present
Post by triggerfish on Sept 28, 2018 11:35:20 GMT -8
I did not get this one btw shop.switchdoc.com/products/grove-sunlight-ir-uv-i2c-sensor But one with the grove plug and the sensor on the same side of the board. Also the pcb seems blueish in stead if this one blackish? Does that make any difference? Also the provided cable does not have the typical grove connector, it lacks the locking part.
Last Edit: Sept 28, 2018 11:36:07 GMT -8 by triggerfish