|
Post by scottaandy on Nov 25, 2018 17:59:11 GMT -8
I changed the D19/D20 connection shown for the 8RGBW Pixel Stick in The Smart Garden System assembly operation manual on page 20 to D21/D26. The main.c for the Pixel Stick has it coded for D21. Yeah, now that part is working.
|
|
|
Post by SDL on Nov 26, 2018 11:22:49 GMT -8
Scott,
I'll go in and fix that immediately in the manual Thank you!
BP
|
|
|
Post by SDL on Nov 26, 2018 18:31:05 GMT -8
Scott,
New Assembly manual 1.2 up on the product page. Thank you for catching that!
Step 17) Connect the 20cm cable (Part M) plugged into the end of the Grove Pixel RGBW Stick marked INPUT (Part J) (routing it through the provided hole) and then into Port D21/D26 on the Pi2Grover (Part A)
BP
|
|